SHENZHEN PENGLAI Industrial Corporation Limited
SINCE 2003
CERTIFICATES
CONTACT US

Email:jackdu999@yahoo.com

Tel:+86-755-86718316

WhatsApp:+86-15811882441

Horizontal snacks foods flow wrapping machine food wrapper packaging machinery pillow type packer
Horizontal snacks foods flow wrapping machine food wrapper packaging machinery pillow type packer
Model YX-450 Horizontal packing machine
Film width Max.400mm
Bag length 130-450mm
Bag width 50-180mm
Product height Max.75mm
Max width of roll film max.320mm
Packing speed 30-150bag/min
Power 220V,50/60Hz,2.8KW
Machine size(L*W*H) 4300*1220*1500mm
Machine weight 1050kg
Description

The machine is wholly PLC controlled . Parameters are set up directly through touch screen. temperature PID control modeenables precision within±1℃. In accordance with food industrial need, we add units of nitrogen charging, corner folding, double chain rows, and free-falling deoxidizer groove,to fully meet customers’ individualized need.

Features of horizontal food packing flow pack model YX-450:
►The mechanical transmission system USES a differential mechanism and automatic transmission, and other types of cancelled this two kinds of mechanical structure. Is the most widely used in various fields of a packaging machine.
►The machine control by PLC, frequency control, the control panel adopts touch screen control, all parameters of the visual display on the screen, reduced the point of failure, and has the function of fault detection, realize the man-machine dialogue.
►Main electric components: PLC, inverter, touch screen, temperature control module adopts the international first-class brand components, high quality to ensure the stability of the whole machine performance.
►On a touch screen realizes PID temperature control mode, can make the accurate temperature control within ±1℃even if is 0.02 mm * single film can also be perfect packaging.
►Direction, tracking and precise photoelectric switch, guarantee the tracking accuracy, to ensure accurate cutting layout complete and easy to adjust, * positioning stop function, which can effectively prevent the parking hot film, reduce packaging waste.

Basic parameter of packing machine horizontal :

illustration of flow wrapping machinery.jpg

Drawing of flow wrapper.jpg

Model

YX-400

YX-450

Film width

Max.400mm

Max.450mm

Bag length

150-400mm

130-450mm

Bag width

50-180mm

50-180mm

Product height

Max.65mm

Max.75mm

Max width of roll film

max.320mm

Packing speed

30-150bag/min

Power

220V,50/60Hz,2.8KW

Machine size(L*W*H)

4300*1170*1500mm

4300*1220*1500mm

Machine weight

950kg

1050kg

Option of flow wrapping machine pillow type:
1, inflatable device ( nitrogen, air, oxygen, etc.)
2, even the package (bag pack Such as Mimi bag)
3, the flower/flat cutter (end seal sealing way)
4, all stainless steel (201 stainless steel, stainless steel 304)
5, code printer (hot print production date, batch number)
6, exhaust device (vent air bag redundant)
7, punching device (round hole, pinhole, convex hole)
8, spray device (alcohol, fresh gas)

Machine integrated with multilanes packing machine

machine integrated with horizontal packing machinery.jpg

Flowing wrapping machiery+shrink tunnel automatic line:

horizontal flow wrapper.jpg

Applicable Category

Food Industry.
Medicine Medical Category.
Beauty Care.
Metal Products.
Classes and Families Chemical.
Packaging Product
horizontal packing.jpg
Various Types of Solid-Like Shape of the Product - such as: Nougat, Pineapple Cake, Cookies, Peanut Candy, Meat, Chocolate, Candied Fruit, Toothbrushes, Syringes, Mouse Pads,

Mask, Wet Wipes, Metal Parts, PIZZA Crust, Bread, Moon Cake, Instant Noodles, Meat, Soap, Rice, Seaweed...etc.

How to install the machine step by step(part,more info visit video site at http://youtube.com/penglaichina)

WORKING process.jpg

1) The first step is to determine the installation position, refer to diagram 3. After the machine is set, take the worktable as the level reference to adjust the four level adjusting screws, set the main machine in a level position.

2) Install the feeding machine, fix it to the left side of the main machine with bolts, then adjust the two level adjusting screws of the feeding machine, set it in a level position. For the part connecting with the main machine, the bottom of the feeding chute and the main machine table should be aligned and kept in a same level.

3) Install the push finger chain. Loosen the left handwheel (see diagram 2) of the feeding machine, and install and connect the push finger chain. Turn the handwheel to adjust the push finger chain to a proper tension.

4) Connect power supply line. This machine uses single-phase 220V, 50HZ power supply. Never connect to 380V or other unqualified power supply. Special attention must be paid to this requirement! In order to ensure safety, all wiring work should be carried out by qualified professional electricians. Connecting cable is attached to the machine. If you use your own power plug, 1.5m㎡three core cable must be used, correctly connect the live wire(L), the zero wire (N), and the grounded wire (E).

Switch on the power and test run

1) Make sure that the power supply is correct(test L, N with a test pencil).

2) Connect all the circuit breakers in the control cabinet, check if all meters and power indicator lamps on the control panel are normal.

3) Press inching button, check if the machine can operate normally.

4) On the human –machine interface, set the packing speed to 40 packages per minute, then press the start button (green), run the machine normally for 3 to 5 minutes, after make sure the machine can operate normally, press the stop button (red). Now a correct installation is completed.

Problems&Solutions:

Problems

Possible causes

Remedies

Cutting position is deviated from the color marks

1. Color mark follow up is not used

2.   The film color mark is weak.

3Film is slipping.

1. Change follow up method into “follow up cut” in the follow up method display of the human-machine interface.

2.   Refer to the magic eye instruction manual attached to adjust the sensitivity of the magic eye.

3Adjust the tension of the rubber roller or the degree of tightness of the brake.

The cutter cut on products

1. The push rod and the cutter are asynchronous.

2.   The height of the cutter seat is improper.

3Packing speed is too high.

1. Refer to section 4.6.4 about push finger position.

2Adjust he height of the end-sealing parts, adjust the sealing knife meshing center to the half of the product height.

3. Decrease the packing speed.

Burnt crimples appear on the seal

1. Temperature is too high.

2. Speed is too low.

3. The thermal endurance of the film’s outer layer is poor.

1. Bring down the temperature.

2. Increase the speed

3. Replace with better film

Sealing is loose or missed

1Temperature is too low.

2Speed is too high.

3The thermal endurance of the film’s inner layer is poor.

1Increase the temperature.

2Decrease the speed

3Replace with better film.

Thermostat does not control temperature

1. Heating element is damaged

2. Solid state relay is burnt.

3. Thermocouple is damaged

4.Temperature control meter is damaged

1. Replace the heating element.

2. Replace the solid state relay

3. Replace the thermocouple

4. Replace the thermostat

ALL RIGHTS RESERVED by ®PENGLAI INDUSTRIAL CORPORATION LIMITED

Reviewed Products
  • Vacuum Wax Injecting Equipment Jewelry Casting Machine for Jeweler Tools Automatic Digital Injector
  • Double chamber bags vacuum sealer food packaging machine semi automatic
  • Lifting type outer pack vacuum packaging equipment semi automatic double chamber impulse heater packer equipment
  • Vertical-form-fill-seal bagging equipment pyramid triangle-shaped bags tea packaging machine customized bagger
  • L Bar sealing shrinking machine automatic L-Type sealer shrinking equipment with view window heating tunnel