
Dimensions: 1700(L)×1200(W)×1770(H)
Weight: about 650 Kg
Power supply:220V 50~60Hz
Power: about 3300W
Sealing temperature:50~300℃ can be adjusted
Air pressure:0.5~0.7 MPa
Air consumption:0.2m3/min
Speed:about 25-28 pieces/min
sealing diameter:Customized
Bottle dimensions: Customized
Bottles shape: Round or square or shaped
Roll film specification: Film width 300MM dual lane,single roll length no more than 500mm,OD nor more than 300mm
IO 76mm(3Inch).Mark:500m length roll film can seal the square container about 7800pcs.
Square container jars Aluminum foil sealing machine automatic rotary foil sealer for square bottles
This automatic rotary square container foil sealer is a highly customized equipment. In response to the client’s request to use their own indexing conveyor,our team came up with this design so that the start and stop of this machine does not affect the continuity of the conveyor. With dual sealing heads, the speed of this machine catches up that of a four heads linear type sealer.
This product is mainly applicable for all kinds of PET PP material bottles .With advanced design, reasonable structure, and simple operation,
this machine is widely used for food, medicine, tea, chemical and other industries necessary ideal packaging equipment.
Applications of foil sealing machine:

Cup water, juice, lunch box, jelly, pudding, bean curd, soy bean milk, fresh frozen food, cold / warm food, agricultural processed food, cosmetic and pharmaceutical products.
For many kinds of packaging product by plastic or paper cup / box.
Characteristics of rotary dual heads sealing machine:

PLC control and with Index Gear Rotary table, easy to Sealing and bordered cutting.
Easy interchangeable sealing head design.
Able to accommodate a wide rang of bottles and containers.
Thermostat controlled heating with digital temperature read out.
Emergency stop button.
Stainless steel and Alu. Alloy construction.
Able to run plain or printed films.
Custom built to customer’s specifications and requirements.
Main parameters of jars sealing machine:

Model YX-FS02-R
Dimensions: 1700(L)×1200(W)×1770(H)
Weight: about 650 Kg
Power supply:220V 50~60Hz
Power: about 3300W
Sealing temperature:50~300℃ can be adjusted
Air pressure:0.5~0.7 MPa
Air consumption:0.2m3/min
Speed:about 25-28 pieces/min
sealing diameter:Customized
Bottle dimensions: Customized
Bottles shape: Round or square or shaped
Roll film specification: Film width 300MM dual lane,single roll length no more than 500mm,OD nor more than 300mm
IO 76mm(3Inch).Mark:500m length roll film can seal the square container about 7800pcs.

OPTIONAL For rotary dual head sealing machine model YX-FS20-R
Auto cup dropping.
Auto filling.
Date printer.
Lidder.
Working stations of rotary two heads foil sealing machine:

Film Control system
A motorized system unwinds the sealing film under the cutting/sealing plate. The film guide rods have side O-rings to prevent film drift during operation.
Extra guides ensure a very high seal success rate. An optical sensor provides self-calibration of film advancement with every seal.
After cutting, the excess film is automatically wound to be discarded or recycled later.
Sealing/cutting station

The film is heat-sealed onto the trays and die-cut around the tray perimeter. Timing and temperature are fully controllable through the digital control panel.
SAFETY FEATURES
There are no gears or chains in the machine which could pinch fingers or clothing. A patented front safety panel
avoids accidental hand insertion or improper container placement. This machine is also equipped with side safety panels to prevent against finger insertions.
Notice before running the sealer:

1.Installing location: horizontal position, no vibration
2.The shell of the equipment must be connected to safe and reliable protecting ground-wire
3.Keep away from or block Large disturbance
4.When application in food packaging ,machine must been working in sterility and dust-free environment .
5.Do not strike or weigh heavily.
6.Check the screws in each part of the machine are loose or not before and after operating the machine
7.Lubricating oil should be added to the moving part after operation;
8.The power supply of the machine must be cut off when repairing and cleaning the machine.
9.When the electrical part break down,try to consult our professional engineers and not allow to repaired by unprofessional person
10.During machine working time,not allow any body parts to get close to each rotation position of the machine.
11.When using air compressor,we have to make sure the air source keep in stable condition,no lower than 0.5Mpa.Besides, a dryer must be used to ensure that the air source into the cylinder is kept dry to provide service life.
Configuration of square container sealer machine:

Item Brand
AC Motors Taibang, Chinese brand
Servo Motors Delta
DC Motors
AC Motor Controller Taibang/ Keken Chinese brand
Servo Motor Controller Delta Taiwan
DC Motor Controller
PLC Delta Taiwan
HMI Delta Taiwan
Temperature Controllers OMRON Japanese brand
Circuit Breakers CHNT Chinese brand
Line / Load Reactors
Contactors CHNT Chinese brand
Relays CHNT Chinese brand
Solid State Relays CHNT Chinese brand
Transformers
Power Supplies (24vdc)
Fans
Safety Relays
Safety Controllers
Push Buttons CHNT Chinese brand
Stack Lights CHNT Chinese brand
Photoelectric Sensors AUTONICS Korean brand
Inductive Proximity Sensors AUTONICS Korean brand
Capacitive Proximity Sensors AUTONICS Korean brand
Safety Sensors
Pneumatic Actuators
AirTAC Taiwan
Pneumatic Valves AirTAC Taiwan
Pneumatic Fittings
Bearings Chinese brand
Linear Bearings
Disconnect Switches CHNT Chinese brand
Electric diagram for the rotary dual head sealing machine:
Wooden case for shipping the rotary sealer:
ALL RIGHTS RESERVED by ®PENGLAI INDUSTRIAL CORPORATION LIMITED

Email:
Tel:+8675586718316






















