Manufacturer YX-99 cellophane box overwrapping machine for playing cards&Perfume Cigar boxes

1.3D boxes overwrapping Machine

Performance Characteristics:

1.No need to regulate the height of two work tops of the machine when the mould is replaced, no need to assemble or dismantle the material discharge chains and discharge hopper. Reduce the replacement time of the mould four hours to the present 30 minutes.

2.New-type double safeguard mechanisms are used, hence other spare parts will not be damaged when the machine runs out of step without the stop of the machine.

3.Original unilateral hand swing device to prevent from shaking the machine adversely, and the non-rotation of the handwheel during the running of the machine can secure the security of the operator.

4.New-type double-rotary film cutting cutter can ensure no need to mill the blade during many-year use of the machine, which overcomes the defect that the traditional stationary single-rotary film cutting cutter was easily worn.

2.Sample

  cellophane box overwrapping machine

3.Uses

This overwrapping packaging machine is widely applicable to the automatic film packaging (with gold tear tape) of various single boxed articles, such as the medicine, health products, foodstuff, daily cosmetics, stationery articles, and audiovisual products.

4.Details

  cellophane box overwrapping machine

5. Main Technical Parameters of 3D overwrapping equipment fully automatic

6.Stock

   cellophane box overwrapping machine

7.Spare parts

 cellophane box overwrapping machine

8.Technical comparison List for overwrapping machines boxes:

9.Components electronics

10.Workshop

11.Equipment of overwrapping machine  fully automatic 3D wrapper boxes model YX-99

12.Shipping 

After sales service for overwrapping machines

Attention:

1)    Before using the machine, you should read the instruction book to avoid damaging machine for misplay.

2) It should arrange the special people to operate and maintenance.

3) Before start the machine, inject 2 litre HJ-20 type machinery oil into rocker concave wheel oil box one time.

4) For producing safely, connect ground cable according to tablet assigned position.

5) The machine should keep clean and beautify. Use mull touches cleanser essence at times, to clean the surface and outer cover.

6) When you do not use machine for long time, should clean the knife of cut part (use xylene or butanol )

7) When find the machine is not synchronous, you should stop machine and check it, to avoid damage other parts.

Guarantee: for all the machine, it claims one year for guarantee.

(Excluded from the warranty are problems due to accidents, misuse ,

misapplication, storage damage, negligence, or modification to the Equipment or its components. ALSO THE EASY BROKEN SPARE PART IS NOT INCLUDED IN THE GUARANTEE)

Installation: after the machine arrive your factory,if you need,our technician will go to your place to install and test the machine and also training your worker to operating the machine

(The time of train depend on you worker). The expenses (air ticket ,food , hotel,the travelling fee on your country) should be on your account and you need paid for the technician USD50 per day.

also you can go to our factory to do training.

After service: If you get the problem on the machine ,our technician will go to your place to fixed the machine as soon as possible. The cost should be in your account.(as above).

ALL RIGHTS RESERVED by ®PENGLAI INDUSTRIAL CORPORATION LIMITED