Email:
Tel:+8675586718316
Model Number YX-420A
Capacity(bag/min) 1020 pcs per min
Range of measurement(ml) 200-2000g sauce sachet
Bag size(mm) (L)50-350 , (W)50-200
Power(W) 1100
Source voltage 380V/50Hz 220V/50~60Hz
Packing material PET/PE,PET/AL foil/PE,PET/PE,NYLON/PE, etc.
Net weight(kg) 600kg
Overall dimensions 625*1200*2250mm(L*W*H)
YX-420A Sauce Paste Automatic Filling Packaging Machine Unit is specially set up for package of product with medium to high viscosity, such as tomato sauce, honey, soya sauce, tomato paste, marinara sauce, liquid waterproof coating, washing detergent, cooking oil, jam, ketchup, butter, peanut paste, sala sauce, chili sauce, mayonnaise, hand soap, semi-fluid products,
The model YX-420A can make pillow type bags, the metering range is 20-500g and 200-1000g, the maximum speed can reach 25bags/min.
Basic parameters of model YX-420A slanted type sealing at both sides of bags packing machine:
Model Number YX-420A
Capacity(bag/min) 10-25 pcs per min
Range of measurement(ml) 200-2000g sauce sachet
Bag size(mm) (L)50-350 , (W)50-200
Power(W) 1100
Source voltage 380V/50Hz 220V/50~60Hz
Packing material PET/PE,PET/AL foil/PE,PET/PE,NYLON/PE, etc.
Net weight(kg) 600kg
Overall dimensions 625*1200*2250mm(L*W*H)
Machine Configuration:
Item Type of brand
PLC: Mitsubish(Japan)
Mitsubish(Japan) Xinjie(China)
Photoelectric tester: Longyou(China)
Motor Motor
Air cylinder AirTAC
Material Material contact part--304 Stainless Steel / bodyshell-201 stainless steel.
Machine integrated with mixing tank and related pipes connection
Technical characteristics of liquid packing machine lotion cream hair gel:
1． English and Chinese screen display ,operation is simple .
2． PLC computer system , function is more stable , adjustment any parameters not need stop machine.
3． It can stock ten dispose , simple to change variety.
4． Sever motor drawing film , position accurately.
5． Temperature independent control system ,precision get to±1℃.
6． Horizontal , vertical temperature control ,suitable for various of mix film , PE film packing material.
7． Packing type diversification , pillow sealing, standing type ,punching etc.
8． Bag–making , sealing, packing, print date in one operation.Work circumstance quiet, low noise.
9. Air expelled before bagging;
Fished bags samples
►Common faults, reasons and elimination
| Trouble | Reason | Shooting way |
Touch the key of ON, but the machine does not work |
1.check if emergency stop switch is restored 2.transducer and servo controller display RC |
1.restore emergency stop switch 2.turn off main power supply, turn it on after 20 seconds creep-age switch trips |
| creepage switch trips | creepage of heating sheet and other electrical appliances | check electric appliances one by one, eliminate |
| sealing roll not hot | 1.protector of open circuit trips 2.heating sheet burnt out 3.temperature control meter damaged |
1.check and eliminate open circuit, recover it 2.replace heating sheet 3.replace temperature control meter |
Number on temperature control meter bounces repeatedly |
Thermcouple loose or damaged |
Fix or replace thermocouple |
temperature is normal when close down, but descends continuously when running |
1.environmental voltage is low, causing descending of power of heating sheet 2.power of heating sheet is too low |
1.reduce packing speed or add voltage stabilizing device 2.replace it with heating sheet of bigger power |
| air leak at sealed mouth of packing bag | 1.temperature is insufficient 2.pressure is insufficient 3.sealing time is too short 4.irregular front and back horizontal sealing rolls 5.material clamped |
1.properly increase temperature 2.check if total pressure is 6.5 kilograms 3.properly increase sealing time parameter 4.carefully adjust parallel status of mouth of horizontal sealing roll 5.adjust baiting time or inflation delay |
| cutting position or cut into half a bag can not be controlled | 1.side of packaging film cockles or photoelectric wrong action caused by poor quality of light path 2.sensitivity of photoelectric head isn’t adjusted well 3.bag set length is insufficient and different lengths caused |
1.replace packing film 2.re-adjust photoelectric sensitivity 3.increase bag length |
| conveyance film does not drop | 1.pressure of conveyance film cylinder is insufficient or too much 2.belt slides of damaged 3.static of packing film is too big |
1.check if pressure of conveyance film is 2.5 kilograms 2.scrape surface of belt with saw sheet or replace it 3.replace packing film |
After-sale service for packaging machine YX-420A slanted type sealing packing machine
►Spare parts list
horizontal sealing heater 4 set
vertical sealing heater 1set
interior hexagonal spanner 4-10mm 1 set
copper brush 120mm 1 piece
cutter 220mm 1set
oil kettle 150ml 1 piece
character grain 1 box
Guarantee: for all the machine, it claims one year for guarantee.(Excluded from the warranty are problems due to accidents, misuse , misapplication, storage damage, negligence, or modification to the Equipment or its components. ALSO THE EASY BROKEN SPARE PART IS NOT INCLUDED IN THE GUARANTEE)
Installation: after the machine arrive your factory,if you need,our technician will go to your place to install and test the machine and also training your worker to operating the machine (The time of train depend on you worker). The expenses (air ticket ,food , hotel,the travelling fee on your country) should be on your account and you need paid for the technician USD50 per day. also you can go to our factory to do training.
After service: If you get the problem on the machine ,our technician will go to your place to fixed the machine as soon as possible. The cost should be in your account.(as above).
ALL RIGHTS RESERVED BY ®SHENZHEN PENGLAI INDUSTRIAL CORPORATION LIMITED
