Tabletop induction sealing machine working principle

The machine conveys the Ultra high frequency to the induction box;The aluminum foil on bottles mouth under the induction box will produce the UHF vortex due to the electromagnetic induction,which results in the instaneous high temperature,thus the plastic part

in the bottle mouth and the aluminum foil will be welded together,finally the bottle mouth will be sealed tightly;

How to operate tabletop type induction sealing machine:

Before starting the machine,put the bottles under the induction box,rotate the wheels to adjust the distance between the induction box and the bottle caps; The optimized distance between both ranges from 1mm to 2mm;

Start the machine,the conveyor moving and put several bottles on the conveyor to check if the bottles can go throught the induction boxes; Adjust the lifting wheel to get the optimized distance for bottles;

2.Adjust the handle in the conveyor to get the ideal data to run the conveyor belt;

3.Adjust the guide bar on the conveyor belt on both sides to the proper position which can let the bottles be alighed with the center of induction head during sealing;

4.Before sealing the bottles choose the time suitable to get the best sealing effect according to the bottles diameter and the sealing effect targetted; Adjust the speed knob to adjust the time when the bottles pass through the induction boxes making the time same with the time to get the

best sealing effect; Adjust more bottles to try :If the bottles are sealed tightly but the bottle mouth and the foil wad get burnt or blistered due to the high temerate,it means the temperature to seal the bottle is too high,accelerate the delivering speed of conveyor belt; If the foil wad after being sealed is easy to fall

off from the bottles,it means the heating time is too short,then decelerate the delivering speed of conveyor belt;

5.After finishing the steps above-mentioned the sealing effect will be good so hat the tabletop induction sealing machine can be available for working;

Drawing of induction sealing machine model YX-S1500A

1.Lifting wheel: lifting the induction box and adjust the bottles height;

2.Induction box: heat the inducted aluminum foil under it;

3.Conveyor belt: Deliver the bottles that require to be heated;

4.Guide bar: Align the bottles with the center of induction box to get the optimzed position to seal the bottle;

5.Start/stop Button: Turn on/off the bottle;

6.Power: ON/OFF

7.Speed-adjusting know:adjust the speed of delivering belt

8.Power Button:Adjust the size of power in the machine

9.Adjust Screw: Adjust the tightness or looseness of conveyor belt or dislocation;

10.Ampermeter/Voltmeter:Give a sign of the voltate/amper value,moniter the working station of machine;

Back of machine: power socket for 220V/50HZ(it can be customized with the US power supply 110V/60HZ);

Fuse socket

Tabletop Aluminum Foil Induction Sealing Machine, Stainless steel induction sealer machine

This machine can not be used for metal cap,machine is made of Stainless Steel, in line with GMP requirement. 
The Bottles materials can be PE, PP, PET, HDPE and glass etc. With high sealing efficiency, easy operation, and the sealing speed can be adjusted at will, with high accuracy. 
Features

This series of machine of transistor circuit control, the characteristics of low cost, simple operation, easy to use. Mainly used for bottle with threaded plastics, glass bottle of bottle etc. Nonmetal induction membrane sealing operation. Applicable to large and medium sealing job. Batch continuity, Not suitable for acid, alkalinity and high humidity and dust more harsh environments (such as pesticides. SAN, etc.) for a long time. These series machines are suitable for single homework, do not use in line connected.Suitable for various sealing of pharmaceutics, daily chemicals, foodstuffs, cosmetics, pesticide and special trades. 
Technical parameters of induction heating sealing machine aluminum foil tabletop electric magnesis sealer Máquina de sellado Botellas:

Model YX-S1500A transistor air-cooled desktop electromagnetic induction machine
Electrical source: AC220V±10% 50Hz
Reactive rate (W) : 1500
Current work more than eight :≤8(A)
Work: continuous conveying
Cooling way: forced cooling fan
Type: desktop
Materials: stainless steel chassis
Sealing diameter: φ 20 - φ 100(mm)
Apply high: 40 ~ 200(mm)
Sealing speed: 0 ~ 10m/min
Host: 115 x 48 ×40(cm)
Host: 38kg

Illustration of model YX-S1500A induction sealing machine:

Dimension of induction sealing machine

Working principle of sealing machine

Circuit diagram for induction sealing machine

Sealing samples for bottles in various sizes

Aluminum foils for sealing machine heating seal:

Wooden case packing for sealing machine tabletop induction sealer:

♦Payment Methods♦

These payments of T/T, L/C, Western Union, MoneyGram,Paypal are accepted. If you have any problem with the payment, please leave a message to us.

♦Logistics♦

DHL, EMS and UPS, Fedex are our choices. If you prefer other reliable shipping company. Please leave a message to us.

♦Tracking Number♦

Tracking number will be informed within 2-3 work days after delivery goods. If you have any problem with it, please leave a message to us.

♦Feedback♦

Any comments, suggestions are accepted. We will be very grateful to your positive footprints left in our company. If you have any problem with our products, please leave a message to us.

♦Refund♦

Any damage or shortage of our goods when you receive your items. Please take some photos for a witness. We will deal with it in 24 hours. Frequently, we will send a new part of items for alternative and heavy-damage, Before refund is accepted, please leave a message to us.

ALL RIGHTS RESERVED by ^®PENGLAI INDUSTRIAL CORPORATION LIMITED