The tube-feeding, filling, sealing, tube-trimming, serial number typing process are automatic operation. End products will be ejected from the eject funnel.Use contact type heater to seal tube fastly. Suitable for soft plastic tubes, laminated plastic tubes, aluminum laminated tubes.

ADVANTAGE on customized tubes filling sealing machine curved tube filler sealer machinery model YX-FS60-A

1.This machine is equipped with a compiter program controlled man-machine-interface with a touch display unit and PLC comtrols, easy for adjustment and operation. The man-machine interface can adjust the speed of the main drive motor, the step motor and the driving motor for the Mixer and required quantity.

2.  Safety protection function: In case of any occurance of the following: temperature too low, air pressure too low, the tubes to be filled are too high or tii low, the safety door is opened, the motor torque is too high, insufficient filling volume inside a tube or the connected cartooning machine is out of order etc., a signal of the related failure will be sent to the LED display to inform the operator for correction, so that the sealng quality and production quantity can be controlled. The hopper is equipped with automatic mixer which helps the filling process to be more smoothly. Optional filling hopper with temperatore and liquid level control function are available for selection.

3.Tubes packed in a box can fed automatically onto the tube holders by a special feeding devicee. This machine is equipped with fast-speed tube feeding device and special cleaning device can be comtrolled by a step motor with a photo-cell element for locating the accurate position of tubes; and the filling device.

4. Equipped with a safety device. If there os no tube available on the tube holder, no filling action will be made. If any tube is positioned too high or too low, the machine will stop. During the filling operation, the tubes can be lifted up and down.

5. The machine is equipped with a housing made of stainless steel to prevent from any contamination due to any peeling of any painting treatment.

6. Equiped with a safety acrylic hood for preventing from any danger of personnel injury or contamination by any foreign body for hygienic reason.

7.All machine parts contacing with the filling material are made of stainless steel SUS 316.

8.Equipped with a cam controller with 12 working stations. Fast speed, easy operation and low rate of failure. Change of working another tube size is easy without the need of any special tool. This machine is also suitable for sealing tubes in diameter 50mm.

9.  Equipped with a contact type heater for fast heating process, therefore, low production cost and easy for maintenance. Besides, the filler sealed will not get damaged, such as any physical or chemical color or quality change.

10. Equipped with special designed filling nozzle to prevent contaminating the tube when filling. After one filling cycle is completer, the air blow device will blow the air to cut off any remaining filler, this a dripping (leakage) problem can be avoided.

11.Equipped with tube cutting device which is suitable for PE and plastic laminated soft tubes. This device will cut unnecessary parts and make the end product more perfect in appearance. The cutting pattern can be designed as customer's requirement.