SHENZHEN PENGLAI Industrial Corporation Limited
SINCE 2003
CERTIFICATES
CONTACT US

Email:jackdu999@yahoo.com

Tel:+8675586718316

Phone:+86-15811882441

Capsule counting machine with single plate semi automatic tables pills counter equipment pharmaceutical machinery capsule tables filler counter small machines
Capsule counting machine with single plate semi automatic tables pills counter equipment pharmaceutical machinery capsule tables filler counter small machines
Tablets capsule counting machine with single plate Semi automatic
Model: YX-TC01
Power Supply: 220 V 180W
Counting range :1-30 / bottles (from a few tablets of disc determined by the number of the number of tablets of holes)
Suit for capsule: 00 # -5 # (set to be the number of tablets and capsules corresponding to)
Max tablet size :20mm*4mm
Max capsule size:24*8mm
Maxiumum count per bottle:
180 capsules of 24*8mm
Counter plate's diameter:385mm
Capacity:10-30bottles/min
Size:600*500*700mm
Weight:50kg
Description

This machine is mainly used for quantitative sub-loaded capsules for pharmaceutical, research units, laboratories, small and medium volume production. The machine uses electromagnet vibration effects, stable, and reliable; Design Science, simple, easy to use, small size and light weight. 

technical parameters of capsule counting machine single plate semi automatic:

illustration for counting equipment.jpg

Model: YX-TC01 

Power Supply: 220 V 180W 

Counting range :1-30 / bottles (from a few tablets of disc determined by the number of the number of tablets of holes) 

Suit for capsule: 00 # -5 # (set to be the number of tablets and capsules corresponding to) 

Max tablet size :20mm*4mm

Max capsule size:24*8mm

Maxiumum count per bottle:

180 capsules of 24*8mm

Counter plate's diameter:385mm

Capacity:10-30bottles/min

Size:600*500*700mm

Weight:50kg

►use of capsules&tables single plate counter equipment semi automatic

tablets counting equipment single plate.jpg

1. Then a good power supply, so that the number of tablets of disc counter-clockwise rotation. 

2. Into an appropriate capsule, open the power supply, will be transferred to a suitable voltage switch position, so that electromagnetic vibration to reach the right intensity, so that the number of tablets capsules disk hole easy access to a few tablets, while dynamic capsule with a brush, so that the number of tablets of hole both capsules. 

3. Bottling, it will bottle feed into the capsule out of the mouth or the mouth of the bottle with your fingers gently touch the micro-switch, the number of tablets of disc rotation to all fall into the capsule under the feed mouth, and then immediately release micro-switch. 

4. Into the next count work, using brush dynamic capsule .

Notes 

semi automatic capsule counting machine.jpg

1. The number of tablets of the height of the disk should be the head capsule length of the same or slightly higher than the number of tablets of Capsule disk, not too low or too high, otherwise turn will ruin capsule is too low can be higher than the pad with the Calibrating the middle part and to the middle hole ended up with the shaft after the match abandoned DVD films, is too high please lathe to a few tablets of the bottom plate washer (do not be confused too low). 

2. Collar disk on the number of particles must be adjusted to the appropriate height, and bottom should be the head capsule to maintain a distance of about 1.5-2MM, too low, hampering the capsules will be too high. 

3. The number of tablets not all covered with holes in the capsule not to be pressed micro-switch, otherwise the position will go to Circlip broke capsule. Counting all the holes in the capsule is not available when covered with a brush dynamic capsule, so that the number of tablets are capsule hole. 

4. Damp after the deformation of the capsule can not count on the machine. 

5. The number of tablets not pressure plate, or not working properly; lift the machinery can not be carried in a few tablets of the plate, otherwise it would loose a few tablets of disc damage. 

6. Capsule to be locked together completely, the length of a unified, without fail capsules. 

7, to lift the machinery must not carry on in a few tablets of disc hopper, or cause damage to the machine! 

8, on the machine feet: You can install the 4 screws and tighten the nut after the feet as the machines used.

Spare parts &samples counted from capsule counting machine

capsule counter equipment.jpg

capsule counter equipment.jpg

capsules for counting equipment.jpg

►Packaging for model YX-TC01 semi automatic tablets capsule counting machine

packaging for pill conting machine.jpg

wooden case for vacuum filler.jpg

Feedback from customers purchasing the machine tablets counter model YX-TC01&other Pharmaceutical equipment

capsule counter equipment.jpg

ALL RIGHTS RESERVED by ®PENGLAI INDUSTRIAL CORPORATION LIMITED

Reviewed Products
  • Bottles unscrambler equipment automatic big &small round plastic bottle unscrambling sorter machine with PLC touch screen controller
  • Pneumatic type tall thick cans seaming machine semi automatic metal tin sealer equipment
  • Tabletop boxes plates banding machine semi automatic Hot melt Paper&OPP tapes Bundling equipment
  • wine bottles corks closing sealing machine semi automatic stopper inserting capping packing machinery
  • semi automatic stand-up type cans sealing machine vertical metal tins sealer electric-driven non-pneumatic closing equipments