SHENZHEN PENGLAI Industrial Corporation Limited
SINCE 2003
CERTIFICATES
CONTACT US

Email:jackdu999@yahoo.com

Tel:+8675586718316

Phone:+86-15811882441

USA CA buyers purchased cigar cans vacuum seaming labeling machines with N2 generator
Published by: PENGLAI INDUSTRIAL CORPORATION
Date:2021-11-02 10:35:37

Our customers from U.S.(North America) placed the order on two(2*) pcs of machines: one is cigar cans vacuum seaming machine model YX-44AA; the other round bottles labeling machine linear type Model YX-630A.
For all the machines purchased it is clear to confirm all the information on the products so we often ask our customers to freight the samples to test and commission the machines in order that the machines and customer's products gains the best compatibility and adaptability.
After getting the confirmation &samples of the product in sizes and drawing for manufacturing the sealing labeling machines
we spent only 20 working days finishing everything and made the machines ready after testing them in a satisfactory feedback.
Recently our customers sent us the positive commentar on the machines which keep running very well in their factory ever since the machines arrived their factory.
The machines was shipped via Fedex to Beverly Hills California 90210. The documentaries certificated with ISO&CO&CE together with other files necessory are sent via DHL to customer for assisting customers to clear the custom.

As below there listed the basic information on the successful transaction between PENGLAI and their American counterpart:

Purchased order issued &Key communiction points During Business Discussion:
PO for YX-44AA.jpg

PO via email.jpg

2018-03-05 17:23 GMT+08:00 Tarik Freitekh:
Thank you Johnny,
 
all sounds good, I appreciate your response. I will mail you the labels, but I believe the USA printing company is trying to understand what is the best roll size that you require or is it adjustable? for example I'm going to send you a roll of labels size 3.81CM width X 20.32 CM height(depth) see atteched photo. so does the label roll have to the same width and height? also I'm going to send you 2.54CM width X 20.32 height but i might need in future to have labels 7.62CM width X 20.32 CM is the machine advisable to do these sizes of labels because I have 6 cans different Heights same mouth diameter 85MM but height is different and it will need different size labels sometimes, I have cans 85MMX43MM 85MMX65MM 85MMx75MM 85mmX85  85MMx100MM I'm going to use label   size 3.81CM width X 20.32 CM  for cans 85MMX43MM
for example and lables size 3.81CM width X 20.32 CM height for cans  85MMX65MM
let me know what should i tell the USA printing company?
Thank you
Kind Regards,
Tarik Freitekh

Tarik Freitekh
An:
Johnny Zhong
Cc:
Michael Peng jackdu999


Sa., 10. März 2018 um 22:48

Hi Johnny,
 
I hope all is well. Unfortunately the label people sent me the wrong label rolls, and to be honest its better for me to buy a label printer that can produce label rolls that  works with your label machine, my label sizes
are
 
 
1. width 25.4MM  Height 203.2MM  for cans 85MMX43MM
2. width 38.1MM  Height 203.2MM  for cans 85MMX65MM
3. width 50.8MM  Height 203.2MM  for cans 85MMX75MM
 
its cheaper for for me to buy empty label sticker rolls and print on them.
 
i need your help in finding this label printing machine. I'm in touch with different sellers in China but I thought it will be easier
if you can help me find a supplier or if you can buy one and I will buy it from you I also need the empty ready rolls to print on on 3 sizes
1. width 25.4MM  
2. width 38.1MM
3. width 50.8MM   
 
 
here is an example of the printer but there are many more companies
 
 https://www.penglaichina.com/labels-roll-counting-rewinding-equipment.html
 
please let me know
 
Kind Regards,
Tarik Freitekh
Samples sent from customers in California U.S.:

can samples.jpg

cans samples (4).JPG

cans samples (2).jpg

cans samples (1).JPG

cans samples (3).JPG

Bank copy of Down&balance payment for purchasing can
bank copy.jpg

balance payment .jpg

WhatsApp Image 2018-02-27 at 19.29.21.jpeg

customer paying money for machines.jpg

HSBC receipt CA tariq vacuum seaming+ cans labeller.jpg

Bank slip.jpg

HSBC receipt Balance payment from Tarik USA.jpg

 

Testing videos on can sealing labeling machines model YX-42AA+ YX-630A

Wooden case packing of cans sealing vacuum type and round can labeling machine.
wooden case packing for cans sealing labeling  (3).jpg

wooden case packing for cans sealing labeling  (4).jpg

vacuum seamer packaging.jpg

wooden case packing for cans sealing labeling  (5).jpg

wooden case cartons (3).jpg

wooden case cartons (1).jpg

wooden case cartons (2).jpg
As follow there given the description on the machines purchased respectively

This machine is with two pairs (four), single roll seam sealing round inflatable head automatic vacuum sealing device. Specifically for tinned,

aluminum cans of a variety of system size round shaped empty cans, paper cans cover or end real purposes. And has the seal on the tank while the vacuum suction function,

add sufficient nitrogen. To a machine. Milk and other food to be particularly suitable for encapsulating nitrogen gas filling. By replacing the corresponding pressure head molds

vacuum seaming machinery model YX-44AA.jpg

can form parts with different specifications can be sealed circular cans. Application scope is wide, adjust the easy to operate, use and reliable.
The machine is equipped with the following safety devices to ensure the safe operation of equipment.
1, the lid combination control device: When the body into the tank when the lid was allocated accordingly, no tank no cover.
2, "Volume without cover letters": When mistakes do not ration into the lid of the tank body, they can be passed seaming bodies
Cans will not bite as well as damage to the paper punch die seal body parts.
3, safety clutch device: When the transmission failure and overload, can interrupt transmission and stop sending tanks.

Drawing of vacuum seaming equipment with nitrogen gas flushing

drawing of model YX-44AA.jpg

THE PERFORMANCE CHARACTERISTICS 0F vacuum canning equipment model YX-44AA

1  the machine cover and main parts adopt SUS304 stainless steel production;

2. the vaouum system of seal materials are silica gel;

3. Tank lid from spreading devioe: when the body enters to the corresponding

Rationing tank cover,no tanks, no oover;

4. this machine automation control, using the panasonic brand of programmable

controller, parameters can be set on the touch screen;

5. all pneumatic components and solenoid valve adopt Taiwan's"guest" brand;

6.with high precision digital display pressure sensor detection of vacuum pressure; 

7. Vacuum with German vacuum pump;

8. the whole process are conducted in a sealed interior.

Basic parameter of model YX-44AA cans sealing machine

vacuum seaming equipment.jpg

Size:1950×800×1800
Weight:750kg
Supply power : AC380V 50Hz 4kW
Power:13A
Canning speed:7.5cans per min
Cans height:100¡«190mm
Cans diameter:99¡«127mm
Air compressor: ≥0.6MPa
Air comsumption: 150L/min
Nitrogen gas pressure:≥0.4MPa
Nitrogen consumption:50L/min
Noise: ≤ 80dB  Vacuum power:-0.09Mpa
Nitrogen Gas residue£ºless than 3%(International Standard)
Powder waste every can£º3g or below

Nitrogen generator for vacuum seaming machine model YX-44AA:

N2 generator.jpg

picture (1).jpg

Demo How to connect the Gas generator with the vacuum seamer

Configuration of model YX-44AA vacuum seaming equipment:

Close shot for vacuum seamer.jpg

seaming head.jpg

circuit board.jpg

Name Components Brand Country

vacuum canning machine

model YX-44AA

HMI  MCGS  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 PLC  Panasonic  Japan
Photoelectric sensor  Panasonic  Japan
pressure sensor  Panasonic  Japan
Switch Power  Ming Well Taiwan
Relay  Omron  Japan
Cylinder  AirTac  Taiwan
Selenoid  AirTac  Taiwan
Contactor  Zhengtai China
Canning motor    China
Conveyor Motor    China
Vacuum MOtor  Haokaodo  Deutschland
Stainless steel SS304  Baosteel China
Filter   China
Vacuum valve  Haokaido Germany
conveyor belt and guide bar  Shanghai Baosteel  China
Bracket    

Canning samples after vacuum-seaming

cans samples for seaming.jpg

Wooden case packing for cans sealing equipment with gas flushing function model YX-44AA

russian wooden case packing.jpg

Guarantee: for all the machine, it claims one year for guarantee.(Excluded from the warranty are problems due to accidents, misuse , misapplication, storage damage, negligence, or modification to the Equipment or its components.

ALSO THE EASY BROKEN SPARE PART IS NOT INCLUDED IN THE GUARANTEE)

Installation: after the machine arrive your factory,if you need,our technician will go to your place to install and test the machine and also training your worker to operating the machine (The time of train depend on you worker).

The expenses (air ticket ,food , hotel,the travelling fee on your country) should be on your account and you need paid for the technician USD50 per day. also you can go to our factory to do training.
  If you get the problem on the machine ,our technician will go to your place to fixed the machine as soon as possible. The cost should be in your account.(as above).

The labeling equipment is for the round bottle labeling in the industry like food¡¢oil¡¢pharma¡¢wine¡¢cosmetics and so on.The machine with elegant design can be easily operated and maintained by the common worker, who requires no special training in operation this machine.Just give a simple adjustment to produce another product when you want to swap the different kinds bottle labeling.

LABELING EQUIPMENT BOTTLES PLC.jpg

The bottle labeler is thus out from as belwo-mentioned characteristics:

1:The main body of equipment is made of SUS304 and advanced Aluminum products.

2:The labeling heads is drived by the Server motor that is imported from Japan.

3:All the light sensor equipment is imported from both Japan and Germany

4:PLC Controlled by the human-machine interface with 60 memory units

5:The machine is the best choice for single worker’s operating.

6:The machine has the function as bottle-uprighting,bottle-distributing¡¢labeling¡¢flating as well as counting.

7:The position¡¢height¡¢angle of labeling can be adjusted easily.

8:Equipped with the conveyor belt,the machine is applied to set of the production line.

ROUND CANS LABELER ETIKETTIERMASCHINE.jpg

Technic parameter of round bottle labeling model YX-630AA:

1

Labeling accuracy

±1mm (not including the label error)

2

Labeling speed

25¡«45bpm

3

Diameter&height of bottles

Diameter£ºφ25mm¡«φ120mm  height£º25mm¡«300mm

4

Label size

Length£º20mm¡«290mm  Width£º20mm¡«160mm

5

Overall size of machine

About 1950mm×1200mm×1530mm£¨L×W×H£©

6

Supply power

220V/50HZ 110V/60HZ

7

N.W

About 185Kg

LABELING EQUIPMENT BOTTLES PLC2.jpg

drawing of label roll.jpg

drawing for cans labels.jpg

Optional function (the price should added according to the choose)

Series

part

function

Number

Unit

Price£¨USD£©

1

Ribbon printer

Production date number

1

Set

620

2

Universal Sensor

Detect the transparent label¡¢hot foil¡¢gilding label

1

Set

1,300

Configuration of round bottles labeling machine

No   Name      Model       Unit          Brand
1 PLC  control system 6ES7212-1A 1Set  SIEMENS
2 Touch-screen 6AV6648-01A 1Set SIEMENS
3 Photoelectric sensor (Check bottle) FS-N18N 1Set Japan KEYENCE
4 Photoelectric sensor (Check opaque label) GS61 1 Set German Leuze
5 Servo motor 2004-RZ08BAIAN 1Set America AB
6 Drive 2003-CSD3-08BX2 1Set America AB
7 Main transport motor 90W1:30 1Set German JSCC
8 Press bottle motor 40W1:30 1Set German JSCC
9 Speed Controller 25-90W 2sets German JSCC

ROUND CANS LABELER ETIKETTIERMASCHINE.jpg

Shipping&after-sales support:

Cans labeling packaging.jpg

Guarantee: for all the machine, it claims one year for guarantee.(Excluded from the warranty are problems due to accidents, misuse , misapplication, storage damage, negligence, or modification to the Equipment or its components.

ALSO THE EASY BROKEN SPARE PART IS NOT INCLUDED IN THE GUARANTEE)
Installation: after the machine arrive your factory,if you need,our technician will go to your place to install and test the machine and also training your worker to operating the machine (The time of train depend on you worker).

The expenses (air ticket ,food , hotel,the travelling fee on your country) should be on your account and you need paid for the technician USD50 per day. also you can go to our factory to do training.
After service: If you get the problem on the machine ,our technician will go to your place to fixed the machine as soon as possible. The cost should be in your account.(as above).

ALL RIGHTS RESERVED by ®PENGLAI INDUSTRIAL CORPORATION LIMITED