SHENZHEN PENGLAI Industrial Corporation Limited
SINCE 2003



UK customer bought water hose labeling machine semi automatic equipment to label hose
Date:2022-08-30 10:48:33

Our new customers from UK (West Europe) placed one order on one(1*) pc of machine: Model YX-WL50A water hose folding labeling machine semi automatic flag cable labeler equipment
For all the machines purchased it is clear to confirm all the information on the products so we often ask our customers to freight the samples to test and commission the machines in order that the machines and customer's products gains the best compatibility and adaptability.
After getting the confirmation &samples of the product in sizes and drawing for manufacturing the labeling machine.
we spent only 7 working days finishing everything and made the machines ready after testing them in a satisfactory feedback.
Recently our customers sent us the positive commentar on the machines which keep running very well in their factory ever since the machines arrived their factory.
The machines was shipped via DHL  courier to Bangor,Co. Down,BT19 7WP UK . The documentaries certificated with ISO&CO&CE together with other files necessory are sent via DHL to customer for assisting customers to clear the custom.

As below there listed the basic information on the successful transaction between PENGLAI and their European counterpart:

Purchased order issued &Key communiction points During Business Discussion:
PO fuer labeller (2).jpg

PO fuer labeller (1).jpg

PO signature.jpg
Samples sent from customers in West Europe:
samples sizes (5).jpg

samples sizes (6).jpg

samples sizes (1).jpg

samples sizes (1).jpg

overall samples for labeller.jpg
Bank copy of Down&balance payment for purchasing semi automatic water hose labeling machine model YX-WL50A
U$3000 AU caps .jpg
Testing videos on Model YX-WL50A water hose labeling machine folding labeller:

Wooden case packing of model YX-WL50A sticker labeling machine:

machine in wooden case.jpg
wooden case packing for labeller (3).jpg

wooden case packing for labeller (2).jpg

wooden case packing for labeller (4).jpg
As follow there given the description on the machines purchased respectively:

Security matters
Please confirm the power supply voltage (AC220V), air pressure 4-6kgf, and the external power supply must have reliable grounding before the 2.1 power supply.
2.2 do not block the cooling hole of the chassis.
2.3 non professional technicians strictly prohibit the opening of the chassis.
2.4 the operating range of body contact is strictly prohibited when the equipment is operated.
When the 2.5 equipment fails, the power switch should be closed first and the electrified maintenance is strictly prohibited.
2.6 the machine is used for the folding and labeling operation of the wire harness and the round rod.
2.7 applicable label parameters: the inside diameter 76mm of the label roll and the outer diameter Max240mm; (other specifications should be fixed).
Label material: PVC, PET, cloth, paper and so on;
Label specification: according to the specific machine
2.8 labeling accuracy: + = 0.2mm;
2.9 capacity: 1500 Pcs/H;
2.10 outer size: 630*740*1040 mm (L*W*H);
2.11 machine weight: about 86KG;
2.12 applicable wire harness: according to the specific machine                                                 
nameplate for labeller.jpg
Operation description
3.1 installation:
3.1.1 moves the device to the required installation position.
3.1.2 trampled the universal wheel brake and fixed the universal wheel to make it smooth.
3.1.3 Label baffle plate: when installing, we must fix the "screw hole of the disk fixing block" to the "material shaft hole", and screw the M6 screw through the screw hole of the material fixing block and lock it into the axle hole of the material tray.
material trays.jpg 
.3.2 equipment appearance, important parts and man-machine control interface.
3.2.1 important parts.

drawing of folding labeller.jpg

3.2.2 main picture.
water hose labeller.jpg

main pictures.jpg                 
A. output: capacity count, press "output zero" key to zero;
B. current position: the real-time position distance display of the sliding mode of the label transmission module, the unit mm;
The operation mode of C. is "automatic" and "foot tread" two kinds.
3.2.3 user parameters.
user parameters.jpg              
A. standard board speed: the speed of the indicator board operation, adjusted according to 0-100%.
B. mark speed: refers to the speed of the label stripped from the stripper plate, adjusted by 0-100%.
C. bottom paper width: the width of the label paper, unit mm.
D. wire diameter: single wire diameter input, flat wire or multi wire input directly to fight double thickness, mm.
E. mark length: control the length of the label from the stripper plate, unit mm.
F. forward: press the "forward" key, the tag drive module will slide forward, this function can adjust the distance of the target position.
G. back: press the "back" key, the tag drive module will slide back to the rear, this function can be debugged the distance of the position of the labeling point.
H. fit: press the "fit" key, the straight air plate clamp cylinder and the wiring harness placing module will move the upper and lower moving cylinders. This function can debug the distance between the wiring harness and the vacuum plate clamping.
I. reset: turn the header back to zero after the reset button.
J. electricity: after the replacement of the different specifications of the label base paper, long press the electrical keys to allow the system to automatically learn labels and bottom paper penetration.

3.3 operation method:
3.3.1 tag is installed, and the label is installed as below to the stripper module.
tag installation.jpg                                                                
3.3.2 boot    
Turn the power switch clockwise and turn on the power. Press the stop key and rotate clockwise.
3.3.3_ switching and adjusting machine according to the diameter of the wire, the adjustment, the connection seat, the distance between the plates, such as the following figure
following fig.jpg input the width of the bottom paper in the width of the bottom paper of Figure
3, and the diameter of the wire is input to the diameter of the wire.
3.3.4 adhesive tape and openings

openings adhesive tapes.jpg                                                       
3.3.5 tag
In the process of production, if the label is not aligned before and after the label,
it can be adjusted directly in the "bottom paper width" column.
Can also move "front and back tone key 1" "front and rear micro tune key  2"
 adjustment, each move to change 0.1mm.                                  
3.3.6 label left and right adjustment machine
If the labels are folded, if the left and right sides are not aligned, the four transmission components must be loosened loosely, then the left and right trimming nuts should be adjusted according to the deviation direction and the degree of the labels. Finally, the four transmission components must be locked.


Maintenance and maintenance
4.1 strictly prohibit pressure, please keep clean at any time.
4.2 in order to lubricate the machine on time.
The active position of the 4.2.1 standard plate is added once a month
If there is a lubricating oil 4.2.2 timing check separator cup, if not timely supplement.
4.2.3 three months to check the wear of the synchronous belt at the various parts of the machine

Random appendage list of 3.6 labeling machine
Number and number of names and specifications
1 inner six corner board 1.5mm 1
2 inner six corner board 2.0mm 1
3 inner six corner board 2.5mm 1
4 inner six corner board 3.0mm 1
5 inner six corner board 4.0mm 1
6 inner six corner board 5.0mm 1
7 inner six corner board 6.0mm 1
8 inner six corner board 8.0mm 1
9 power line 220V*2.5M 1
10 pedal switch / 1
11 trachea 8 per cent *3M 1