SHENZHEN PENGLAI Industrial Corporation Limited
SINCE 2003



UK customers purchased Tubes ultrasonic sealing MC with pneumatic filler&Lipstick Moulds
Date:2019-06-29 11:59:24

Our Regular customers from UK (United Kindom) placed another order on two(2*) pcs of machines(packaging materials): one is ultrasonic sealer with custom filler system model YX-009; the other lipstick packaging materials 1000PCS.
For all the machines purchased it is clear to confirm all the information on the products so we often ask our customers to freight the samples to test and commission the machines in order that the machines and customer's products gains the best compatibility and adaptability.
After getting the confirmation &samples of the product in sizes and drawing for manufacturing the filling sealing tubes machines
we spent only 10 working days finishing everything and made the machines ready after testing them in a satisfactory feedback.
Recently our customers sent us the positive commentar on the machines which keep running very well in their factory ever since the machines arrived their factory.
The machines was shipped via DHL courier to UK . The documentaries certificated with ISO&CO&CE together with other files necessory are sent via DHL to customer for assisting customers to clear the custom.

As below there listed the basic information on the successful transaction between PENGLAI and their Eu counterpart:

Purchased order issued from UK customer:
PO fuer YX-009 sealer with pneumatic filler.jpg
Samples sent from customers in Europe
TUBES samples for ultrasonic filler sealer (2).jpg

TUBES samples for ultrasonic filler sealer (3).jpg

TUBES samples for ultrasonic filler sealer (1).jpg
Bank copy of Down&balance payment for purchasing model YX-009 filler sealer tubes machine:
HSBC Receipt Abi fuer moulds penglai machinery.jpg

HSBC Receipt from Abi YX-009 penglai sealer.jpg

Lipstick moulds UK customers machinery packaging materials.j
Testing videos on Model YX-009 High viscosity materials filling sealing tubes machine

Wooden case packing of tubes filler sealer model YX-009&Lipstick mould packaging materials:

silicon lipstick mould (2).jpg

Finished silicone  lipstick mould (3).jpg

silicon lipstick mould (4).jpg

YX-009 wooden case for shipping (2).jpg

YX-009 wooden case for shipping (3).jpg

YX-009 wooden case for shipping (1).jpg

wooden case packing for truck delivery to seaport.jpg
As follow there given the description on the machines purchased respectively

Model YX-009 single head filling Machine inline with ultrasonic sealing machine function and application

YX-009 sealing machine with filler.jpg

1.Use ultrasonic to weld plastic soft tube tail. Do not need any adhesive or filler or solvent when welding, do not consume large amounts of heat, and easy to operate, high welding speed, high efficiency.

2.This machine is widely used in toothpaste, cosmetic, medical product, food and industrial tubes etc.

Main parameters of simple inline filling sealing machine tubes filler sealer semi automatic:

YX-008 filling tubes sealing equipment (1).jpg

5pcs for filling sealing.jpg

Model YX-009
Power Supply 220V/50HZ/Single phase
Power 1500w
Frequency 20Khz
Tube Length 40-280mm
Tube Diameter 10-80mm
Filling volume A:5-30ml   B: 6-60ml   C: 10-120ml    D: 25-250ml   E: 50-500ml (Optional)
Size 735*6701300mm
Weight 130kg

► Sealing  Machine layout

Drawing of ultrasonic sealer with filler.jpg

drawing of filler sealer.jpg

1.Main body  2.Sensor  3.Tube Hight adjustment  4.Front mould  5.Back mould  6.Cutter 

7. Gas-pressure meter  8.Gas-pressure adjustment  9.Emergency button  10.Start button

11.PLC   12.Holder  13.Moulds gap adjustment  14.Power lamp  15.Power switch

17.Tune   18. OSC check  19.Over load lamp  20.Loading meter

(Remark: Pls checking the Front mould Screw if with strong lock, as Afraid when the transportation and screw is loose)

Machine actual in stock ultrasonic tube sealer:

ultrasonic sealer equipment.jpg


1.Press to English to next page , and press Auto to manual 

start homepage.jpg

TOUCH screen for filling sealing (1).jpg

►Sealing part

Motor start : this is for control the Tube holder running

Feeding cylinder start:  this is for control the Tube holder feeding

Ultrasonic cylinder start: this is for control the up mould and down mould working.

Trimming cylinder start:  this is for control the cutter

Fill Cylinder : This is for control the Filler head cylinder star or Stop  when manual

Fill start:  This is for control the filling star or stop when manual

Ultrasonic start: This is for control the frequency, this is same as the “18. OSC check”

Tube Orientation on : this is for control the Sense off/on

Time setting:  This is for Adjusting the Delay time/ Welding time/Holding time

Delay time : 0.80   

Welding time: Tube Dia 20,the time will about: 0.20, 

Tube dia 30,the time will about 0.40

Tube dia 40, the time will about 0.50

Tube dia 50, the time will about 0.7

Holding time:  0.35

►Filling part

filling part.jpg

►Operation process

ultrasonic tubes sealing illustration.jpg

1.Connect power and compressed air correctly (suggest 0.5MPa).

2. Press the Power switch

3. Press ‘OSC check’ button and set ‘Tune button’ at the same time, Pls using the screw on the Tune button, you can turn to Left or Right, while find the minimum of  ‘Signal light’ (it will about low than  1A) fixed ‘Frequency adjustment’. (do not press ‘OSC check’ continuously, press it intermittently)

4.Put tube on the holder.

5.Press ‘Ultrasonic cylinder start’, front mould and back mould will be closed. set ‘Moulds gap adjustment’, let two moulds just touch and no gap. Press ‘Cutter controller’ and confirm the cutter will work smoothly.(need to put the plastic tube on the tube holder when you adjusting)

6.Set front mould and back mould and cutter at original position.

7.Put tube on the ‘Holder’ and press ‘Feeding cylinder start’, the tube will run between two moulds. Adjust the height of holder if necessary. (suggest tube is higher than back mould 2 to 3 mm)

8.Make tube back to original position.

9.Set to auto status, turn on sensor if tube has color code otherwise turn off it.

10.Press ‘Auto’ the machine will work automatically.

Remark:  Pls also read the machine install video for reference !!!!

►Tubes filling-sealing samples

ultrasonic tubes sealing equipments.jpg

tubes sealing samples for South Africa customer (3).jpg

tubes samples for ultrasonic sealing machine.jpg

►Failure and remedy




Machine doesn’t work or work abnormal

No power or compressed air

Connect power and compressed air

Low compressed air pressure

Enhance air pressure

Plastic overflow or not good after welding

Two moulds too closed or too parted

Adjust the gap between two moulds

rough edge after cutting

Cutter blunt

Sharpen cutter or replace sharp one

Cutter has large gap between back mould

Make cutter touch back mould