Email:
Tel:+8675586718316
Our customer from Turkey orders one(1*) set model YX-1035 vials crimping machine recently and because we have several sets of vials crimper in our stock ,
we can send the machine within 3days after confirming receiving of the payment from our EU buyer .
According to our customer's offered ampoule bottles pictures and sizes we tested the machines with the bottles purchased in the supermarket;
Our customer was satisfied at our testing run of the machinery video and we sent the machine via DHL ;
As below there is the basic information on model YX-1035 ampoule crimper equipment:
Bank copy for model YX-1035 crimping machine
Bottles drawing sent from customer
Testing run video of vials crimping machine
Wooden case packing before Air freight
As below there listed the basic description of semi automatic vials sealing machine crimper:
This machine is mainly used in a variety of glass bottles, aluminum combination lid, aluminum lid,easy-open lid seal, not suitable for screw cap cover.
Semi-automatic sealing machine,applicable to the sealing of the oral liquid bottles, vials, penicillin bottles, antibiotic bottles,
glass bottles.
1ml-50ml bayonet glass bottles, not suitable for spiral mouth glass bottles.
The whole novelty, beautiful, machine design is reasonable, lightweight.
Table and protective cover are
stainless steel manufacturing, wheel strength, wear resistance, long life,
good sealing the bottles rolled aluminum cover.
Is the most ideal for small batch production of major hospitals, pharmaceutical companies,
research and capping equipment.
Application of manual crimping machine for oral liquid vials ampoule bottles with aluminum caps Model YX-1035
1. a bottle of good irrigation liquid and fitted lid into the next tray,
leaning against the V-shaped branch block,
hand held onto the bottle with one hand and the handle toward the down taut,
then tray care bottle lift, until the cap and rolled hijab pressed.
2, when the cap and rolled hijab pressed, the three capping of
the spinning heads rotate a few laps, the cap rolled tight.
(Note) The motor must be clockwise operation.
3, the handle forward and push the rolling good cover lid with the tray back into place,
the whole operation process is complete after each rolling a cap, repeat the above operation
Basic parameter of model YX-1035 small bottles oral liquid vials crimping machine
| Model | YX-1035 |
|
voltage |
220V/50Hz |
|
power |
50w |
|
Sealing diameter |
10-35mm |
|
capacity |
20 bottles/min |
|
Apply bottles heigh |
30-180mm |
|
size |
35*25*65cm |
|
Net weight |
26kg |
|
Material |
Stainless steel |
|
Bottles capacity |
1ml-50ml |
Crimping samples for vials oral solution glass bottles with aluminum caps
Fumigation-free wooden case packaging for manual crimping machine model YX-1035
Business terms for model YX-1035 aluminum caps crimping locker equipment for oral liquid ampoule containers
