SHENZHEN PENGLAI Industrial Corporation Limited
SINCE 2003
CERTIFICATES
CONTACT US

Email:jackdu999@yahoo.com

Tel:+8675586718316

Phone:+86-15811882441

Russian customers bought tabletop round spray bottles capping machine with date printer
Published by: PENGLAI INDUSTRIAL CORPORATION
Date:2019-09-02 11:43:05

Our new customers from Russia (East Europe) placed one order on one(1*) pcs of machines: model YX-L60T labeling round bottles machine with date printer
For all the machines purchased it is clear to confirm all the information on the products so we often ask our customers to freight the samples to test and commission the machines in order that the machines and customer's products gains the best compatibility and adaptability.
After getting the confirmation &samples of the product in sizes and drawing for manufacturing the round bottles sticker labeling machine.
we spent only 5 working days finishing everything and made the machines ready after testing them in a satisfactory feedback.
Recently our customers sent us the positive commentar on the machines which keep running very well in their factory ever since the machines arrived their factory.
The machines was shipped via courier to Russia . The documentaries certificated with ISO&CO&CE together with other files necessory are sent via DHL to customer for assisting customers to clear the custom.

As below there listed the basic information on the successful transaction between PENGLAI and their European counterpart:

Purchased order issued from Russian customer:
1set codes.jpg

talked von Skype PENGLAI.jpg

Scan of contract for labeling machine PO.jpg
Samples sent from customers in East Europe
loson-compact-FINAL-PREW.jpg

sprey univ.jpg

50ml sprey.jpg
Bank copy of Down&balance payment for purchasing labeling round bottles machine model YX-L60T
bank copy for labeller.jpg
Testing videos on Model YX-L60T round bottles labeling sticker with date printer machine:

Wooden case packing of model YX-L60T Round bottles labeling machine with date printer.

labeller with printer.jpg
wooden cases with spare parts (2).jpg

wooden cases with spare parts (4).jpg

wooden cases with spare parts (1).jpg
As follow there given the description on the machines purchased respectively

The round bottles labeling machine is mainly composed of main unit, paper feeder, paper collector and bottle locator, YX-L60T semi-automatic round bottle labelling machine is suitable for all kinds of round articles’ labelling. Manually place the bottles onto the locator, pull down the hand pull switch after locating the bottles and then the the labels will be automatically applied on them.

Ⅰ.Main Technical Parameters of model YX-L60T labeling machine with batch number coding

 labeling machine with date coding.jpg

labeling machine details samples.jpg

1.Productivity:10—50 b.p.m

2.Labelling accuracy: ±0.5mm

3.Percent of Pass:   ≥99%

4.Power Supply: 220V 50Hz/110V 60Hz

5.Total Power:  0.2KW

6.Dimensions: 600(L)×300(W)×400(H)mm

7.Weight:50KG

8.Label Roll Outer Diameter: 260mm Max,Inner Diameter:75mm.

Ⅱ.Adjustment of Main Components

penglai china labeling.jpg

1.Paper Feeding

Open the front lid of paper feeder, then put the labels in the label tray. Confirm the right positioning the forward and reverse direction and hang it as per the labelling direction

2.Bottle Locating

Place the bottle into the local after confirming the labelling direction, and then trial label one label to observe if the positioning of labelling is correct. Then adjust the front, back, left and right positions of locator to confirm the position of labelling.

3.Labelling Light sensor

Confirm the label is in alignment with the stripping mouth by adjusting the front and back positions of the light sensor.

Ⅲ.Installation & Test Run

►After confirming the position to install the unit, adjust the four machine leg screws to make the main unit at level with desktop.

►User must get familiar with the structure, work principle, methods of adjustment and technical parameters of the unit.

►Check if each component is in good condition and lubrication status of each transmission part. Lubrication oil must be supplemented if in shortage.

►The unit can be used for normal operation once there is no abnormity is found after half an hour’s test run.

►Light Sensor Sensitivity Adjustment

COARSE & FINE Adjustment.

details for labeling equipment.jpg

Set to Minimum on COARSE and to Middle on FINE.

Put an object in front of the detecting head, rotate COARSE to the right slowly until OUT is on.

Then adjust Fine knob, rotate to the left until light is off, then to the right until light is just on.

Ⅳ.Operation

►Check the voltage of power source to be same with machine’s power supply.

►Connect to power source, switch light will be on.

►Check if labels are well hung and positions are correct.

►Trial labelling on an object, then adjust the label light sensor to make label out position in alignment with stripping plate and the mould position to the appropriate.

Ⅴ.Maintenance

►Change lubrication oil for the gearbox and reduction box once each month.

►Oil each drive sprocket, cam and gears regularly with butter.

►Scrub each component with ethyl alcohol, but never spray-wash with water.

►After each use, scrub clean each drive belt-driven roller clean and store in clean places.

Ⅵ Common Faults & Trouble Shooting

Faults

Trouble-shooting

Labels drift left and right

Check if the bottle locator and bottle bottom’s contact is in place each time and also if the label locating ring is adjusted in consistency and in place

Label crinkles

Adjust the position between labels and stripping plate, to make it in alignment with the stripping plate or 1-2mm above

Does not label

Check if the hand pull structure is in good contact with the microswitch and the distances between bottle locators are appropriate.

Ⅶ.Packaging,loading and transportation.

labeling machine with printer in factory.jpg

wooden case packing for round bottles labeling (2).jpg

Labeling equipment in wooden case.jpg

1. Packing

The machine should be sealed for packing, each component should be fixed firmly and the crate bottom should be solid.

2. Loading

The machine should be loaded correctly with forklift lifting from bottom and then moving, never be placed side down or upside down. 

3.  Transportation

The machine should be transported correctly placed, with crate bottom in good contact with truck contact surface.

 ALL RIGHTS RESERVED by PENGLAI INDUSTRIAL CORPORATION LIMITED