On the 20th Nov we received our customers from Australia Moulbourne Tony and Angel,who visited the RO water treatment for dental hospital .The output water is at least 10us,aftera long talking in our business we design the whole project for the RO water purification system.

Below is the basic information about this Water treatment purification system.

 

1T Stainless Steel Reverse Osmosis Water Purifier
 

Specification of water purifier equipment:

RO Water purifying system uses the American latest Reverse Osmosis device. 

Meanwhile ,this equipment with the preprocessing device, by the high pressure ,

 it enables the water to pass the reverse osmosis film with a diameter of 

one ten-thousandth of a micron and separates impurities, ion, microbes and colloids in the water, 

so as to meet the water requirements in cosmetics ,pharmacy ,electronics and food industries. 

 

Technological flow chart of water production

Raw water——Pressure pump—Multimedia Filter——Active carbon Filter——Ultrafilter——RO system——Purifying water tank 

 

Equipment configuration 

1、 Pressure Pump 

Material：Stainless steel

Model：5㎡/h

Quantity ：1piece

Brand ：Joint venture

2、 Multimedia Filter

Material：Stainless steel

Model：1465

Configuration：Stainless steel pipes and valves

Filtering material：Quartz sand 

Quantity ：1set 

Country of origin：America

2、 Active carbon Filter

Material ：stainless steel 

Model ：1465

Configuration：Stainless steel pipes and valves

Filtering material：Apricot shell Active carbon

Quantity ：1set 

Country of origin：America

3、 Ultrafilter

Material：stainless steel

Model：D220×H550

Filter element ：PP 20 inch 5pieces（3-5u）

Quantity ：1set

4、 RO system 

Model ：RO-1000L

Country of origin：Assembling the imported parts

Configuration ：（1）4 pieces BE-4040 low pressure Conposite membrane,4 pieces stainless steel tubes.

（2）1 piece High pressure pump , the model is QDL2-150,the type is vertical multistage pump。

（3）Stainless steel frame,stainless steel pipes,pressurization index is 25㎏/㎝2。

（4）Electric controller （Including 1 piece digital readout conductivity gauge,2 pieces flow gauge,

4 pieces pressure gauge,1 piece PLC Controller,3 sets Pump control switch.

（5）PLC and Imported solenoid valve control the automatic flushing system（Automatically flushing 

60seconds when the machine turn on,automatically flushing 60 seconds after the machine working 6 hours continuously ）

 

Capacity and characteristics

1、 Continuous water production without the need of regeneration ,reducing labor strength.

2、 Automatically turn the machine off when it is short of water cause by the low pressure 

and full of water cause by the high pressure . 

3、 PLC microcomputer monitoring, flushing the reverse osmosis membrane af regular intervals.

4、 Small in size ,low energy consumption,non-pollution ,no need regenerateion and meet the GB drinking water requirements.

5、 90% parts are imported , using the famous brand membrane to improve the stability and 

durability of the equipment.

 

 The requirements of the machine operation

a) Raw water

1、Pressure of water-in ≥1.5㎏/㎝2   2、pipe diameter≥1″

3、Comductivity of the water-in≤300us/㎝

b) Voltage 

Three phase and four wires 15A RCD 

c) Size 2200×800×1800m3

Power:2.5kw   Voltage:380V three phase four wires Current:Max6A

The Advantage of EDI

(1) No regeneration chemicals. (2)Continuous ,simple operation. (3)No hazardous waste stream.(4)Reduced facility requirement (5)High flow rates (6)Coast effective (7)Robust stack design 

(8)Consistent and predictable results (9)Easy to install and maintain (10)Standard film technology,lowest voltage(11)Energy-saviry and environmental (12)No need to add salt or concentrated water resycle system.

Water treatment purification treatment RO system in the Toothpaste making line for Singapore customers:

 

RO water treatment purication system for Juice making line for Yemanian customers Amin Salim:

 

Guarantee: for all the machine, it claims one year for guarantee.(Excluded from the warranty are problems due to accidents, misuse , misapplication, storage damage, negligence, or modification to the Equipment or its components. ALSO THE EASY BROKEN SPARE PART IS NOT INCLUDED IN THE GUARANTEE)

Installation: after the machine arrive your factory,if you need,our technician will go to your place to install and test the machine and also training your worker to operating the machine (The time of train depend on you worker). The expenses (air ticket ,food , hotel,the travelling fee on your country) should be on your account and you need paid for the technician USD50 per day. also you can go to our factory to do training.

After service: If you get the problem on the machine ,our technician will go to your place to fixed the machine as soon as possible. The cost should be in your account.(as above).

Annotation: What is the EDI system in the RO system:

Electrodeionization for ultrapure water
Electrodeionization (EDI) is used after reverse osmosis for polishing of demineralized water to obtain low levels of conductivity and silica. The EDI uses ion exchange membranes, ion exchange resins and electricity to produce high-quality water with no regeneration downtime. EDI is an alternative to a conventional mixed bed polisher.

Typical applications for EDI are boiler feedwater at heat and power plants, process water within the electronic industry, the pharmaceutical industry, hospitals and laboratories.
Typical applications of EDI
EDI after RO for low conductivity

Water for power plant
Instead of using a conventional mixed bed, a membrane degasser in combination with EDI can produce high-quality demineralized water without using any chemicals. This provides corrosion-free boiler feedwater with low conductivity and silica content.  

EDI for ultrapure water at a microelectronic company

Ultrapure process water
EDI after reverse osmosis supplies ultrapure process water with low conductivity. The photo shows EDI for ultrapure water at a microelectronic company. The EDI is customized with special pharma modules for a hygienic design.
EDI making purified water within pharma industries

Water for pharma
Purified water production within pharma industries requires a water treatment system in a hygienic design. The EDI is customized to meet the current versions of European and United States Pharmacopoeia (USP, Ph. Eur.).

PENGLAI INDUSTRIAL CORPORATION LIMITED