SHENZHEN PENGLAI Industrial Corporation Limited
SINCE 2003



Moroccan customers bought Semi automatic portable capping machines handheld capper equip
Date:2016-11-07 18:05:15

Another customer in Morocco 26400 had soualem bought only one set of portable capping machinery model YX-EC60;Our mid-east customer sent us the caps pictures

and sizes via WhatsApp so that we can manufacture the machine without requiring our customer to send us the bottles and caps samples;

We have many handheld capping machine in our stock and we soon tested one among them and ship it when getting the confirmation from our customers to whom we

sent the detailed pictures and videos for the machinery;

As below there is the basic process for this international transaction:

Caps samples offered via WhatsApp from customer

Bank copy for portable capping.jpg

Bank copy for handheld capping machine model YX-EC60

Bank copy for portable capping.jpg

Testing video for capping machine handheld small capper

Packaging before DHL shipping

CAPPING machine via DHL wooden case.jpg

As follow there listed the details for the basic information on the model YX-EC60 capping machine:

Hand-held electric Capping Machine easy to carry, can be easily used to tighten loose, or spin a variety of caps. The adjustable clutch can effectively avoid the cap damage and reduce the wear and tear inside the plug. Once the cap is fully tightened, the machine automatically stop rotating head that you can cap the next operation.

diagrame of electric capping machine.jpg

The capping machine include: host, aluminum capping head and buffer.

OPERATION on handheld capper equipment semi automatic:

Put Chuck onto the Cap to be tightened

Push down switch to active the Capper

The Capper starts and tightens the cap

The Capper automatically shuts off while reaching the pre set torque

SPECIFICATION  of model YX-EC60 Handheld electric capping machine:

payment terms shipping delivery of capping machine.jpg

Power Supply


Chuck Size Available

10-20 MM

20-30 MM

30-40 MM

40-50 MM

Standard Units

Chuck x 2

Hand Tool x1

Spring Balancer x1

Rubber insert x4


Reactive rate(W):80

Work:electric capping
Case:plastic material
Production capacity:(times/min),depending on the worker,s operation.
Applicable bottles of high:(mm):random
The size(cm):7(seven)by 30

how-to about Handheld capping machine
capping head in hand.jpg
instruction of hand held capping machine.jpg

Operating Procedures:

(1) Directly plug in the 220V’s 3-outlet power socket that connects with ground wire.

(2) Place the reversible switch to the required position (downward is forward rotation, upward is backward rotation, middle is for neutral).

(3) Insert the screw capping head into the main bearing mouth, and push it into the right place by positioning to the U-slot.

(4) Moving the moment adjusting collar to the required place(the moment increases in clockwise, otherwise decrease).

(5) Accurately position the screw capping caps to the screw and press the pressure lever switch, it will start.

Matters Need Attention

(1) This instrument must be used under a circuit that having a ground line.

(2) This instrument cannot be used in wet, corrosive and high-density dust atmosphere.

(3) To protect the breadboard and the electric motor, you cannot change the reversible switch that in operation. Or it will shorten the device lifetime.

(4) You should not dissemble the instrument in case of its failure within the warranty time, what is suggested is to take it to the appointed maintenance station, or you will take the consequences by yourself.

 capping head of portable capping.jpg

Capping samples :

mineral bottles capping machine.jpg

plastic bottles for screw capping.jpg