Our EU customers from Ireland(Europe) placed another order on one(1*) desktop capping machine screw type
For all the machines purchased it is clear to confirm all the information on the products so we often ask our customers to freight the samples to
test and commission the machines in order that the machines and customer's products gains the best compatibility and adaptability.
After getting the confirmation &samples of the product in sizes and drawing for manufacturing semi automatic capping machines
we spent only 7days finishing everything and made the machines ready after testing them in a satisfactory feedback.
Recently our customers sent us the positive commentar on the machines which keep running very well in their factory ever since the machines arrived their factory.
The machines was shipped via courier to Ireland . The documentaries certificated with ISO&CO&CE together with other files necessory are sent via DHL to customer for assisting customers to clear the custom.

As below there listed the basic information on the successful transaction between PENGLAI and their EU counterpart:

Purchased order issued from EU customer:

Samples sent from customers in EU land

Bank copy of Down&balance payment for purchasing capping machine

Testing videos on capping machines

Wooden case packing of ca[[ ing machines.

As follow there given the description on the machines purchased respectively

The model YX-SCM001 desktop screw capping machine is suitable for the cap screwing of different shapes of bottles in the industries of foodstuff, pharmaceuticals,

daily chemical, pesticide and cosmetics etc. Its four adjustable speed motors are used respectively for cap supplying, bottle clamping, delivering and cap screwing.

It is characterized by high level of automation, outstanding stability, easy adjustment, no need of spare parts for replacing bottle types or caps, which can be done only by adjusting.

Ⅰ. Desktop Screw Capping Machine Function:

1.Control panel      2.Power switch    3.Torque regulator  4.up and down adjustment    5.capping motor   6.cylinder      7.capping head 8.position withstand

Ⅱ：Main technical parameters:

1.     Power Voltage：AC220／50Hz

2.     Cap Diameter：￠16-￠45MM

3.     Capping speed：20-50PCS／min

4.     Applied bottle height：40-330MM

5.     Air compressure：0.2-0.6Kgf／cm

6.     Weight：25Kg

7.     Size：48(L)Ｘ40(W)Ｘ60(H)CM

Ⅲ：Operation Precautions:

1.     Before using, add ISOVG32 pneumatic gas oil or equivalent oil on the gas source processor.

2.     To adjust the capping head according to the bottle height.

3.     To adjust the cap size, according to the bottle cap, two sides adjust at the same time.

4.     To adjust the position withstand, let the bottle mouth under the center of the capping head.

5.     To adjust the Torque regulator meet capping strength.

6.     Switch on the power, open the hand sliding switch for gas.

7.     Control valve operation, first to pull up the adjustment switch can adjust the air pressure.

8.     Manual operation, to connect the food stamp switch under the electric box. Note: To be sure the manual/ automatic button on the red light position.

Ⅳ：Trouble treatment method

1.    Machine cannot open, check if it is supply AC220V power or power is damage, transformer burn off, change a new one.

2.     Cannot work automatic, manual/automatic doesn’t switch, or not open start button, or the wire board in trouble, electromagnetic valve cause it.

3.     Motor does not move, torque adjustment switch broken or transformer, capping motor, capping motor start button in trouble. 

4.     Capping lose or not tight, adjust the torque regulator.。

5.     Capping motor does not move, check if the power, or electromagnetic valve, wire board in trouble.

6.     Cap press cylinder does not move, check if the power, or electromagnetic valve, wire board in trouble.

Ⅴ：Operation panel function:

1.      Torsion Force Adjustment

2.      Capping pause interval tine display

3.      Lock cap time display

4.      Automatic

5.      Stop

6.      Manual

Ⅵ：System maintenance

1.     Before or after opening the machine, keep the machine inside and outside clean, to make sure the machine normal movement.

2.     In the morning and afternoon, check all screw of the machine, sure no loose, if find, tightening it with tool.

3.     Keep other products away from the machine, to avoid stop the machine move.

4.     Out of work time, turn off the power to avoid other trouble.

Capping Machine pictures&Spare parts

ALL RIGHTS RESERVED by ^®PENGLAI INDUSTRIAL CORPORATION LIMITED