SHENZHEN PENGLAI Industrial Corporation Limited
SINCE 2003
CERTIFICATES
CONTACT US

Email:jackdu999@yahoo.com

Tel:+8675586718316

Phone:+86-15811882441

Greek customers bought semi automatic rigid box forming and corner taping equipment
Published by: PENGLAI INDUSTRIAL CORPORATION
Date:2022-10-25 11:00:20

Our new customers from Greece (South Europe) placed the order on two(2*) pcs of machines: model YX-BF450B rigid box forming machine,the other YX-40 Box corner taping pasting machine.
For all the machines purchased it is clear to confirm all the information on the products so we often ask our customers to freight the samples to test and commission the machines in order that the machines and customer's products gains the best compatibility and adaptability.
After getting the confirmation &samples of the product in sizes and drawing for manufacturing the boxes forming and pasting machines
we spent only 7 working days finishing everything and made the machines ready after testing them in a satisfactory feedback.
Recently our customers sent us the positive commentar on the machines which keep running very well in their factory ever since the machines arrived their factory.
The machines was shipped via DHL courier to AG.ANARGYRON 4 17564 ATHENS GREECE. The documentaries certificated with ISO&CO&CE together with other files necessory are sent via DHL to customer for assisting customers to clear the custom.

As below there listed the basic information on the successful transaction between PENGLAI and their Greek counterpart:

Purchased order issued &Key communiction points During Business Discussion:
Mail for placing the order of box machines.jpg

PO via email.jpg

PO shrift.jpg
Samples sent from customers in South Europe

samples sent from Greek customer (5).JPG

samples of boxes (1).JPG

samples sent from Greek customer (3).JPG

samples sent from Greek customer (8).JPG

samples sent from Greek customer (7).JPG

Bank copy of Down&balance payment for purchasing Boxes forming and corner taping machines:
bank copy for box machines.jpg

1st bill of machine boxes.jpg

2nd bill machine.jpg

3rd bill.jpg
Testing videos on Model YX-BF450B &YX-40 Rigid boxes forming and corner pasting machine:

Wooden case packing of the rigid box forming bubble removing machine and taping corner equipment:

shipping boxes machines to Greece (4).jpg

shipping boxes machines to Greece (3).jpg

shipping boxes machines to Greece (6).jpg

shipping boxes machines to Greece (7).jpg
As follow there given the description on the machines purchased respectively

The Servo type semi automatic rigid paper box forming machine is the ideal processing equipment rigid box, box. First, Inner box bottom paste with surface paper, then fix the product on the mold of the forming machine by hand, different size box with different mod, then automatic four side pasting, folding, and bubble pressing.Hardcover box can greatly improve the production efficiency.

details of bubble removal machine.jpg

Basic parameters of rigid boxes making machine:

Model YX-BF450B

Max Box Size 520*420*150mm

Min Box Size 80*80*10mm

Thickness of paperboard    Range    1-3mm

Thickness of paper    Range    80g-300g

Folding Edge Inside size    Range    10-70mm

Folding Ears size    Range    10-100mm

Speed 15-25pcs/min

Motor Power 1.5kw

Voltage 220v 50Hz

Air Pressure 0.8mpa

Weight 450kg

Dimension 1010*1280*2300mm

Package Dimension 1110*1450*2200mm
Remark
Special size could customize, pls show the sample and size to us.

Features of rigi boxes making machine:

Illustration of rigid box forming machine.jpg

dieline cutter.jpg

Performance feature:

name plate.jpg

1. Main transmission adopts double servo drive, smooth operation, high stability.

2. Adopt double guide rail and adjustable position screw, with high accuracy positioning, debugging facility and high efficiency.

3. Multi function making system, it can make different type boxes.

4.Using PLC programming technology, touch screen man-machine interface, main motor adopts imported Japanese Panasonic servo motor, double drive, Omron relay, AIRTAC, double safety System Taiwan Infrared protection, negative pressure type bumper.

5.The whole machine parts are made of high precision machining center, high precision.

6.This machine for the upper and lower box type, molding, folding, foam, one-time molding.

Application of rigid boxes making equipment:

rigid boxes.jpg

samples of boxes (3).JPG

samples of boxes (1).JPG

Automatic rigid box making machine, which is the necessary equipment for making different type package box, such as rigid box,  gift box, jewelry box, cell phone box.etc.It's advantage of small size box, simple operation, fast speed.
This machine start to fold the edge automatically, and do the forming , wrapping action in one time,with advance PLC and variable frequency changer, which can control the speed freely, and this machine also with safety devices to ensure the production safe and fast speed,
Use the electrical brushes to ensure the final box product with more tightly and smoothly.

Operation language in touch screeen of rigid box making machine:

operation language (2).jpg

operation language (3).jpg

operation language (1).jpg

Instructions on Semi-automatic folding bubble remove machine

1. Machine mold installation.

machine installation (1).jpg
A set of molds includes three parts, Part A, Part B, Part C. It is suggested to stick a piece of cardboard of the same size on Part C to avoid screw impression.

machine installation (2).jpg
The air switch could control the expansion and contraction of the center square rod. When the air source is on, the center square rod will retract automatically, and when it’s off, the center square rod will lose traction. It is possible to decide whether to open or close the air source switch based on actual conditions, so as to facilitate the installation of the mold Part B. When installing the molds Part A, Part B, Part C, make sure they are in a stable and center symmetry state.


2. Adjust top base on the center and four side extrusion board.

adjusting the board (1).jpg
Use the control panel on the right side of the machine to adjust the rise and fall of the top base on the center and its speed.
adjusting the board (2).jpg

adjusting the board (3).jpg
Turn on air switch, go to “Cylinder setting” and click “Positioning OFF” and switch to “Positioning ON”. Then loosen the screws circled in the figure and adjust the pressing plate position on four sides to fit the box length, width and height, and then tighten the screws to fix the position.

3. Adjust machine operating parameters.
Core Principle: The machine center spindle is driven by the servo motor. Once done with position parameters setting, it pauses at five positions, and each cylinder cooperates to perform the process of carton folding and pressing.
parameters (1).jpg
“Current position”: The instantaneous position parameter value of the center spindle at any position. It changes with the rise and fall of the central spindle.

parameters (2).jpg
“Current position” refers to position parameter values of “Home position”, “Position to fold”, “Folding depth”, “Return position”, “Bubble-remove posi.”.
When you click “Axis up” and “Axis down” to adjust the center spindle to rise or fall to an appropriate position, press “Save” for 3 seconds, then current position parameter value could be saved.
“Home position”, “Position to fold”, “Folding depth”, “Return position”, “Bubble-remove posi.” Once the corresponding position parameter value is set, tap on “Back” and press the pedal switch, it will start working.

4. Definition and Parameter setting
“Home position”: The spindle is at standby mode, waiting for case loading. Set the position parameter value to ensure that the case can be loaded successfully put into the machine.
parameter setting (1).jpg
Click on “Axis up” and “Axis down” to adjust the center spindle up and down to the position (as shown). The mold is about 10 cm above the edge of the box, ensuring that the case is successfully loaded into the machine.
parameter setting (2).jpg
Press and hold "Save" for 3 seconds to automatically save current value of position parameter.
“Position to fold”: Click “Axis up” and “Axis down” to adjust the center spindle the position (as shown). The mold is placed in a position where the paper is pressed on the top of a case. Keep the paper in place, waiting for the mold to go down into the case and fold the packing paper.
parameter setting (3).jpg

parameter setting (4).jpg
Press and hold "Save" for 3 seconds to automatically save current value of position parameter.
“Folding depth”: Click “Axis up” and “Axis down” to adjust the center spindle the position (as shown). The mold just snaps completely into the position of the packing paper at the top of the box.
parameter setting (5).jpg

parameter setting (6).jpg
Press and hold "Save" for 3 seconds to automatically save current value of position parameter.
“Return position”: Click “Axis up” and “Axis down” to adjust the center spindle to the position (as shown). The mold is at approximately 1 cm above the position of the paper at the top of the box. Make room for the next fold.
parameter setting (7).jpg

parameter setting (8).jpg
Press and hold "Save" for 3 seconds to automatically save current value of position parameter.

“Bubble-remove posi.”: Click on “Axis up” and “Axis down” to adjust the center spindle up and down to this position (as shown). The mold just reached the bottom of the box. Please do not continue to make the center spindle down till now, otherwise the servo motor will crash due to strong interference.
parameter setting (9).jpg

parameter setting (10).jpg
Press and hold "Save" for 3 seconds to automatically save current value of position parameter.
5. Machine regulation completed.

regulation of machine (1).jpg
Click "Back" and then press the pedal switch to start working.
Solution to servo motor crash due to improper operation caused by overload protection: If the center spindle cannot be raised or lowered when "Axis up" and "Axis down" are clicked, check if "Current position" displays a negative value (as shown).

regulation of machine (2).jpg
If “Current position” displays a negative value, click “Back Home” to check if the center spindle can return to the starting position. If yes, the machine could return to the normal; if no, please switch off the power and wait for one minute, then switch on again and the machine back to normal.
6. power on and shutdown operation sequence. Power on: Turn on the machine's power switch first, then turn on the machine's air supply switch. Shutdown: Turn off the machine's power switch first, then turn off the machine's air supply switch. Note: Keep the air supply dry when using the machine.

Circuit diagram for semi automatic rigid boxes making machine:

circuit 1.jpg

circuit 2.jpg

circuit 3.jpg
Rigid boxes corner taping pasting machine model YX-40

The box corner pasting machine is the great necessary semi auto equipment for making rigid set up box, use for finish process of pasting cardboard box corner. compact to designed with small size and light weight, easy to adjust and operate as requirement, can keep correct angle sticking, beautiful appearance, quick speed and favorable price. It is one of the perfect semi auto equipment for equipped your rigid box making line.
Product Name
Manual Paperboard Rigid Box Corner Pasting Machine

tape corner machine.jpg

nameplate machine taping.jpg

Product Model YX-40

Max.Box Size Unlimited

Min.Box Size 40*40*10mm

Speed 20-40units/minute

Horsepower 1/2HP/220v

Power 0.40KW

Weight 150kg

Dimension 800*380*1400mm

Features of boxes corner taping machine:

corner machine taping.jpg

1) Electric single-arm press-fit control device.

2) Digital display to control temperature.

3) The vertical depth of the angle can be adjusted at will, which is suitable for a variety of cartons.

4)This machine adopts foreign advanced technology, and combines domestic industries features to design decoration angle forming equipment. It has the feature of small land covering, convenient operation, rational structure, and fast speed. It is special equipment to make paper box linear angle, applicable to large medium- and small-sized printing and packing plants.

How to loading the tape for corner taping machine:

load tape.jpg

Open tape box door, remove the nut and baffle, and load the tape. Please note the tape has a smooth finish and a matte finish. Keep the matte side facing down when the tape is fed. Then install the baffle and tighten the nut. Take and lead the tape through the holes, insert it into the tape slot, press the chain down, drive the rubber wheel, and let the tape pass through the bottom of the rubber wheel to the entire tape groove, till the knife edge.

Note: For the sake of safety, do not turn on the power switch and the running switch while loading the tape and adjusting the box support.

How to operate the corner taping pasting machine:

Turn on the power switch, the machine enters the heating state, wait for 2 minutes till it heats to the setting temperature. Then turn on the running switch, and step on the foot switch, then the machine will start working.

Note: For the sake of safety, do not turn on the power switch and the running switch while loading the tape and adjusting the box support.

ALL RIGHTS RESERVED by ®PENGLAI INDUSTRIAL CORPORATION LIMITED