

Our Regular customers from Chile (South America) placed another order on Eight(8*) pcs of machines: Model YX-EC60 handheld screw capping machines.
For all the machines purchased it is clear to confirm all the information on the products so we often ask our customers to freight the samples to test and commission the machines in order that the machines and customer's products gains the best compatibility and adaptability.
After getting the confirmation &samples of the product in sizes and drawing for manufacturing the portable screw capping machines
we spent only 7 working days finishing everything and made the machines ready after testing them in a satisfactory feedback.
Recently our customers sent us the positive commentar on the machines which keep running very well in their factory ever since the machines arrived their factory.
The machines was shipped via DHL courier to Parque Industrial Valle Grande, Lampa. The documentaries certificated with ISO&CO&CE together with other files necessory are sent via DHL to customer for assisting customers to clear the custom.
As below there listed the basic information on the successful transaction between PENGLAI and their Chilean counterpart:
Purchased order issued &Key communiction points During Business Discussion:
Samples sent from customers in South America
Bank copy of Down&balance payment for purchasing Screw capping machines handheld type:
Testing videos on 8pcs screw capping machines model YX-EC60
Wooden case packing of Handheld screw capping machines
As follow there given the description on the machines purchased respectively
Hand-held electric Capping Machine easy to carry, can be easily used to tighten loose, or spin a variety of caps. The adjustable clutch can effectively avoid the cap damage and reduce the wear and tear inside the plug. Once the cap is fully tightened, the machine automatically stop rotating head that you can cap the next operation.
The capping machine include: host, aluminum capping head and buffer.
OPERATION on handheld capper equipment semi automatic:
Put Chuck onto the Cap to be tightened
Push down switch to active the Capper
The Capper starts and tightens the cap
The Capper automatically shuts off while reaching the pre set torque
SPECIFICATION of model YX-EC60 Handheld electric capping machine:
Power Supply |
220V/60HZ |
Chuck Size Available |
10-20 MM 20-30 MM 30-40 MM 40-50 MM |
Standard Units |
Chuck x 2 Hand Tool x1 Spring Balancer x1 Rubber insert x4 |
Voltage:AC220V/50HZ/60HZ
Reactive rate(W):80
Operating Procedures:
(1) Directly plug in the 220V’s 3-outlet power socket that connects with ground wire.
(2) Place the reversible switch to the required position (downward is forward rotation, upward is backward rotation, middle is for neutral).
(3) Insert the screw capping head into the main bearing mouth, and push it into the right place by positioning to the U-slot.
(4) Moving the moment adjusting collar to the required place(the moment increases in clockwise, otherwise decrease).
(5) Accurately position the screw capping caps to the screw and press the pressure lever switch, it will start.
Matters Need Attention
(1) This instrument must be used under a circuit that having a ground line.
(2) This instrument cannot be used in wet, corrosive and high-density dust atmosphere.
(3) To protect the breadboard and the electric motor, you cannot change the reversible switch that in operation. Or it will shorten the device lifetime.
(4) You should not dissemble the instrument in case of its failure within the warranty time, what is suggested is to take it to the appointed maintenance station, or you will take the consequences by yourself.
Capping samples :