Our Regular customers from Australia (Oceania continent) placed another order on three(3*) pcs of machines: one is inline screw capping machine model YX-SCM003; the one delivery conveyor belt 3meters,another model YX-BS12 bottles turntable feeding&accumulation type
For all the machines purchased it is clear to confirm all the information on the products so we often ask our customers to freight the samples to test and commission the machines in order that the machines and customer's products gains the best compatibility and adaptability.
After getting the confirmation &samples of the product in sizes and drawing for manufacturing the capping with bottles feeding machines
we spent only 7 working days finishing everything and made the machines ready after testing them in a satisfactory feedback.
Recently our customers sent us the positive commentar on the machines which keep running very well in their factory ever since the machines arrived their factory.
The machines was shipped via courier to Australia. The documentaries certificated with ISO&CO&CE together with other files necessory are sent via DHL to customer for assisting customers to clear the custom.

As below there listed the basic information on the successful transaction between PENGLAI and their Oceanian counterpart:

Purchased order issued from australian customer:

Samples sent from customers in Oceania:

Bank copy of Down&balance payment for purchasing capping bottles feeding belt:

Testing videos on bottles turntable capping with belt accumulation platform:

Wooden case packing of bottles turntable&capper&conveyor belts:

As follow there given the description on the machines purchased respectively:

This unscramble bottle machine is the artificial bottles in the round table, wheel rotation will have to dial the conveyor belt into the bottle, into the filling machine for filling. Easy to use, simple operation is one of the indispensable link

Related equipment: the following equipment can be selected, can form unscramble bottle-filling-capping-labeling-the production line

Main Technical specifications

Major Characteristics:

The template of this machine adopts stepless speed adjust foe slew, make all the bottles enter into conveyer belt in order under the rotary tangential force, less labor, boost production efficiency. 
This machine can be used after electrified. Easing operating, it can be widely used for glass bottles, plastic bottles and polyester bottles for pharmaceutical, agrochemical, food, chemical etc. It is a

Good choice for small, medium, large factory.

Basic parameter of inline screw capping machine model YX-SCM003:

Supply power  AC220V 50HZ
Power  650W
Size 2000L*650W*1500H[MM]
Net weight 180KG
Air pressure 0.4—0.6MPa
Caps diameter  18mm≤Φ≤150 mm
Bottles height 50-400mm  Width 20-200mm
Speed     30—40PCS/Min
Torsion 4--8kg/cm

►Drawing of model YX-SCM003 inline capping machine:

Capping adjustment from A to Z

A.     Bottles fixing adjustment

1.   Loose the handle (3)

2.   Put the pre-fixed bottles(1

3.   Eyeball if the caps center is coincident with cylinder (9)center; once coincided fix the handle(3)

B.   Capping height adjustment﹒

1.   Loose the handle(7)

2. Adjust the handle(12) to make the capping friction wheel(4) bottom distance at 2mm to the caps bottom,fix the handle (7)

C.   Capping friction gaps adjustment:

1.   Close the air source

2.  Put the fixes caps between the friction wheels(4)

3.  Approach the caps by moving the friction wheel(4) to adjust the stroke module(5)screw (both sides should be symmetrical by eyeballing measurement).The right fas should be 2mm to 3mm for each side ;

D.   Capping cylinder height adjustment (according to caps samples)

1. Loose the screw(8) make the capping cylinder (9) protrude;

2. Leave the distance at 1mm-2mm from the capping nut to the tops of caps

3. Tighten the screw(8)

E.   Capping cylinder speed adjustment

1. Connect the supply power and air source to adjust the pressure setting for air pressure (standard 0.74mpa-0.6Mpa)

2. Adjust the capping time and capping interval (standard 1s to 1.5s) select the state as Manual ,Point the pedal switch to adjust the left-right friction wheel pneumatic speed ,finally it should make the speed at both speed at an equal level;

3. Adjust the capping cylinder speed 。

F.   Testing run of machine

1. Take out one product for the testing run of capping ; Refurbish the capper according to the capping effect;

2.  Adjust the torque according to the torsion force.

Guarantee: for all the machine, it claims three years for guarantee.(Excluded from the warranty are problems due to accidents, misuse ,

misapplication, storage damage, negligence, or modification to the Equipment or its components. ALSO THE EASY BROKEN SPARE PART IS NOT INCLUDED IN THE GUARANTEE)

Installation: after the machine arrive your factory,if you need,our technician will go to your place to install and test the machine and also training your worker to operating the machine

(The time of train depend on you worker). The expenses (air ticket ,food , hotel,the travelling fee on your country) should be on your account

and you need paid for the technician USD50 per day. also you can go to our factory to do training.

After service: If you get the problem on the machine ,our technician will go to your place to fixed the machine as soon as possible. The cost should be in your account.(as above).

®PENGLAI INDUSTRIAL CORPORATION LIMITED

ALL RIGHTS RESERVED by SHENZHEN PENGLAI INDUSTRIAL CORPORATION LIMITED