SHENZHEN PENGLAI Industrial Corporation Limited
SINCE 2003
CERTIFICATES
CONTACT US

Email:jackdu999@yahoo.com

Tel:+86-755-86718316

WhatsApp:+86-15811882441

Double layer two color tablet rotary punch machine laundry powder making pressing equipment high speed multicolors
Double layer two color tablet rotary punch machine laundry powder making pressing equipment high speed multicolors
Type YX-RP25 YX-RP31 YX-RP37
Dies 25sets 31sets 37sets
Max. Pressure 80KN 80KN 80KN
Max. Dia. of Tablet 25mm 18mm 13mm
Max. Depth of Fill 18mm 18mm 18mm
Max. Turret Speed 46r/min 46r/min 46r/min
single-layer Production Capacity double-layer 138000pc/h 65000pc/h 171000pc/h 80000pc/h 204000pc/h 100000pc/h
Motor 40KW 40KW 40KW
Weight : 1200kg
Size:910*1120*1800
Description

The machine is a double or three-pressing automatically revolving piece-pressing machine which could make grain be pressed to be round piece, be carved characters, special shapes and double or three color piece prescription. It is mainly used in manufacturing piece prescription for pharmaceutical industry enterprises like chemical industry, foods, electronics. (Note: When manufacturing double or three color piece, it only need replacing components and adding powder absorbing apparatus which greatly lowers the cost and raises profit. )

Operating principle of rotary tablet press machine high speed double layer pills maker:

two layer tablet making.jpg
1. The cover is made of stainless steel with close type. The inner tablet surface is also applied with stainless steel materials which could keep surface luster and prevent from being polluted crossly, comply with GMP requirement.
2. Equipped with plexi glass perspective window which could help to observe the status of pressing piece. Side blank could be fully opened, easy to clean and maintain. All monitors and operating components are in good order. Applying with frequency changing, speed regulating apparatus to do electricity regulation. The convenient operation and smooth revolving are safe and correct.
3. Equipped with over-load protection apparatus. When pressure overloads, the machine will stop automatically. Combining machine with electricity, equipped with touching key and screen. The first of its kind to use semi-automatically lubricating equipment and plexiglass anti-dust cover on the upper of revolving table.
4. Ransmitting system is sealed in the oil box under the main machine which is a separate component. No pollution and easy to send out heat and resist grinding.
5. Powder-absorbing apparatus could absorb the powder in the piece-pressing room.
6. Easily-damaging components such as upper orbit, material-adding machine, transmitting pole, powder measurer have general structures with PENGLAI PUNCH products which could help to be standard, general and series.
Applications of tablet making machine rotary pills press equipment YX-RP series:

two tablet maker.jpg
a.Chemical: disinfection tablets,detergent tablet, Chlorine tablet, camphor balls, glass tablet, ceramic tablet, magnetic tablets and so on.
b.Food: candy tablet, seasonings tablet, Chicken tablets, coffee tablet, chocolate tablet and etc.
c.Agriculture: animal feeding blocks, fertilizer tablets, livestock salt licking blocks, seeding nutrition soil tablet.
d.Health Products: calcium tablet, propolis tablets, effervescent tablets, bath salts tablets

basic parameter of Bicolor rotary tablet press machine

drawing of two hopper.jpg

drawing of rotary tablet press.jpg

Type YX-RP25 YX-RP31 YX-RP37
Dies 25sets 31sets 37sets
Max. Pressure 80KN 80KN 80KN
Max. Dia. of Tablet 25mm 18mm 13mm
Max. Depth of Fill 18mm 18mm 18mm
Max. Turret Speed 46r/min 46r/min 46r/min
single-layer Production Capacity double-layer 138000pc/h 65000pc/h 171000pc/h 80000pc/h 204000pc/h 100000pc/h
Motor 40KW 40KW 40KW

Weight : 1200kg
Size:910*1120*1800

A tablet press is a mechanical device that compresses powder into tablets of uniform size and weight. A press can be used to manufacture tablets of a wide variety of materials, including pharmaceuticals,

illicit drugs such as MDMA, cleaning products, and cosmetics. To form a tablet, the granulated material must be metered into a cavity formed by two punches and a die,

and then the punches must be pressed together with great force to fuse the material together.
A tablet is formed by the combined pressing action of two punches and a die. In the first step of a typical operation, the bottom punch is lowered

in the die creating a cavity into which the granulated feedstock is fed. The exact depth of the lower punch can be precisely controlled to meter the amount of powder that fills the cavity.

The excess is scraped from the top of the die, and the lower punch is drawn down and temporarily covered to prevent spillage.

Then, the upper punch is brought down into contact with the powder as the cover is removed.

The force of compression is delivered by high pressure compression rolls which fuse the granulated material together into a hard tablet. After compression, the lower punch is raised to eject the tablet.

tablet working process for pressing tablets.jpg

An old rotary tablet press
There are 2 types of tablet presses: single-punch and rotary tablet presses. Most high speed tablet presses take the form of a rotating turret that holds any number of punches.

As they rotate around the turret, the punches come into contact with cams which control the punch's vertical position. Punches and dies are usually custom made for each application,

and can be made in a wide variety of sizes, shapes, and can be customized with manufacturer codes and scoring lines to make tablets easier to break.

Depending on tablet size, shape, material, and press configuration, a typical modern press can produce from 250,000 to over 1,000,000 tablets an hour.

Mould&dies for different sizes of tablets

Tablet-Press-Punch-and-Mould.jpg

Tablet common shape made from tablet press machine

common shapes tablet.jpg

Machine tablet press&tablets samples final product

rotary tablet press machinery.jpg

tablet press equipment samples.jpg

Tri-color three layers tablet making machines&tablet samples

tablets_for_machine_dishwashing_3layer_washing_powder_tablet

tablets_for_machine_dishwashing_3layer_washing_powder_tablet

tablet three layer punch.jpg

Standard wooden case packing for rotary tablet press before shipping

3-Layers-Rotary-Tablet-Press-Machine-Zpw23(8).jpg

standard wooden case for shipping.jpg

How to operate the machine &install&dissamble rotary tablet press equipment demo

PENGLAI INDUSTRIAL CORPORATION LIMITED

Reviewed Products
  • automatic bottles vials amper glass container ultrasonic cleaning washing machine high speed washer equipment
  • Single head Semi-automatic Magnetic Pump bottle liquid filling machine‎ tabletop type oil medium viscosity materials filler equipment
  • foil cutting inserting caps liner system fully automatic caps feeding wadding equipment with die cutter function
  • automatic hot melt adhesive carton boxes case opening erecting bottom forming sealing equipment end packaging integated line erector former sealer equipment
  • Jars container heating drying tunnel machine automatic rotary circulatory heating sterilizing oven for washed glass bottles