SHENZHEN PENGLAI Industrial Corporation Limited
SINCE 2003



Semi automatic tube filler equipment linear filling ultrasonic sealing equipment for cream lotion liquid packaging
Semi automatic tube filler equipment linear filling ultrasonic sealing equipment for cream lotion liquid packaging
Model YX-008 Semi automatic tubes filling machine:
Power 1.6kW
Ultrasonic frequency 20kHz
Capacity 10~15pcs/min
Power Supply 220V 50Hz
Air Supply Pressure 0.6~0.8Mpa
Filling range 80-250(ml)(Can be custom-made)
Filling accurancy ±1%
Dimension 735×670×1300(mm)
Weight :110kg

The machine is suitable for medicine, foods, cosmetics, daily chemical industry, the machine has two process, sealing and trimming, which is suitable for sealing of plastic tubes, with Unilateral coding, MCU control, human-machine operation, the operation is easy and the whole running is stable.

This kind of machine is suitable filling and sealing of plastic tubes in pharmaceutical, cosmetics, daily use and chemical industries, such as toothpaste and skin cleansing cream. The machine, which has three process, filling, sealing and trimming, with Unilateral coding, MCU control, human-machine operation.
Easy operation and the whole running is stable.
Features of Model YX-008 semi automatic filling ultrasonic sealing line simple compact filler sealer tubes Tubo de crema máquina de llenado :

Automatic filling
Automatic lot No. print
Ultrasonic tube end sealing
Basic parameter of
Power  1.6kW
Ultrasonic frequency  20kHz
Capacity 10~15pcs/min
Power Supply  220V  50Hz
Air Supply Pressure  0.6~0.8Mpa
Filling range  80-250(ml)(Can be custom-made)
Filling accurancy  ±1%
Dimension  735×670×1300(mm)
Feature of filling ultrasonic sealing:

Filling part

(1) For high viscosity liquid filling and paste filling;
(2) Adopts pneumatic working principle, simple operation, high filling precision;
(3) A certain concentration or certain size granular materials ideal filling equipment;
(4) Stainless Steel Construction;
(5) Rugged Rotary Valve System Design;
(6) Pneumatic Operation, the air compressor should be prepared by the buyer. The requirement of the air compressor:
Pressure: 0.4-0.6MPa Power: 1100W Gas Capacity: more than 50L
(7) Piston Feed Speed Adjustment;
Sealing part:

►Seal all plastic and laminate tubes, ANY shape or size
►Production speeds of up to 15 tubes per minute
►Date / Lot Coding of all tubes already built-in
►Seals through product contamination
►Very low reject rate, less than 1%
►Ultrasonic sealing eliminates ‘flash’ and ‘ears’ versus hot-air sealing methods
►Rotary cutting knife to cleanly cut even the thickest tube ma­terials
►Change-over time of less than 5 minutes
►Line operators can setup and run machine, no mechanics required
►Training new operators is literally a 10-minute procedure, ex­tremely simple
►Small footprint, table-top design
►Perfect for small production runs and lab use
►No warm-up time needed, plug in and it’s ready to seal tubes right away
►No water requirement
►Single phase, 110v power (no 3-phase power required)
►Needs only a very small air compressor for air requirements

Molds&tubes holder:

mold for sealing.jpg

fashion shot on upper mold (2).jpg

tube holders for sealing machine.jpg

tube labeling equip labels samples.jpg

►FAQ about ultrasonic tubes filler sealing machine model YX-008

1.If i order this machine , how to operation it ?

Answer:  Ultrasonic Tube Sealer  is easy and simple operation, you just connect the electricity , and air compress machine

2.About Guarantee:

Answer: one year. The supplier can replace only the elements that are imperfect for material or handwork. Replacement is free. All imperfect elements have to be delivered within 12 months (carriage paid). Guarantee excludes every worn or torn parts. Replacement handwork is excluded and it will be done by the buyer. The supplier is not responsible for any rewards for, damages or last earnings met by buyer. Guarantee is not valid if the machine is used the wrong way or it is not serviced as shown in our technical handbook.

3.Do you have other model ?

Answer: Of course . we have semi-automatic type (YX-008) and Automatic filling and sealing machine for you .Please view our Home page .

4.What is the power supply?

Answer : we can design according to your inquiry . usually it is :220V/ 1 phase . 110V/single phase.

5.Is this machine need mould ?

Answer: yes it need mould . The machine will one pc welding mould free in charge.

►Shipping &delivery for PENGLAI SEALING Machines

shipping for mixing filler equipment.jpg


Reviewed Products
  • Vertical type cosmetic cream ointment sauce filler equipment with heating&mixing function semi automatic flow filling machinery
  • Juice pouch filling &sealing rotary machine automatic stand up pre-made bags liquid filler sealer equipment
  • two heads filling machine pneumatic-driven gear oil 5000ml double nozzles filler eequipment semi automatic
  • Vap Pen Cartridge thick oil E-liquid Filling Machine Atomizer equipment Monoblock three in one filler capper line
  • Bag-in-Carton end packaging machine bags roll film loading cutting inserting into cartons boxes filling equipment