SHENZHEN PENGLAI Industrial Corporation Limited
SINCE 2003
CERTIFICATES
CONTACT US

Email:jackdu999@yahoo.com

Tel:+86-755-86718316

WhatsApp:+86-15811882441

USA&Bangladesh customer for Screw capping machine benchtop capper equipment small capper
Published by: PENGLAI INDUSTRIAL CORPORATION
Date:2013-11-23 11:30:05

On 20th Nov we received two orders about the desktop screw capping machine for spray pump caps:

one customer Nazrul Islam from USA Halethorpe, MD 21227; the other Jignesh from Bangladesh. Due to

the supply power in USA is 110V-120V/60Hz,it is therefore neccessory to add an inverter in the desktop screw capping machine.As given below

are the bottles from them

Bottles and caps from Nasrul Islam:

picture about 桌式旋盖机 瓶子bottles for screw capper desktop.JPG

Caps samples from Jignesh

jignesh samples caps .jpg


Model : YX-SCM001 Desktop screw capping machine

 for spray pump caps

 

Main technical parameters: 
1.Power Voltage:AC220/50Hz
2.Cap Diameter:15-50MM
3.Capping speed:20-50PCS/min
4.Applied bottle height:40-330MM
5.Air compressure:0.2-0.6Kgf/cm
6.Weight:25Kg
7.Size:48(L)X40(W)X60(H)CM 

desktop screw capper.jpg


Operation Precautions:

drawings about desktop screw capper.jpg


1.Before using, add ISOVG32 pneumatic gas oil or equivalent oil on the gas source processor. 
2.To adjust the capping head according to the bottle height. 
3.To adjust the cap size, according to the bottle cap, two sides adjust at the same time. 
4.To adjust the position withstand, let the bottle mouth under the center of the capping head. 
5.To adjust the Torque regulator meet capping strength. 
6.Switch on the power, open the hand sliding switch for gas. 
7.Control valve operation, first to pull up the adjustment switch can adjust the air pressure. 
8.Manual operation, to connect the food stamp switch under the electric box. Note: To be sure the manual/ automatic button on the red light position.


Guarantee: for all the machine, it claims three years for guarantee.(Excluded from the warranty are problems due to accidents, misuse , misapplication, storage damage, negligence,

 or modification to the Equipment or its components. ALSO THE EASY BROKEN SPARE PART IS NOT INCLUDED IN THE GUARANTEE)

Installation: after the machine arrive your factory,if you need,our technician will go to your place to install and 

test the machine and also training your worker to operating the machine (The time of train depend on you worker).

 The expenses (air ticket ,food , hotel,the travelling fee on your country) should be on your account and you need paid for 

the technician USD50 per day. also you can go to our factory to do training.

After service: If you get the problem on the machine ,our technician will go to your place to fixed the machine as soon as possible. 

The cost should be in your account.(as above).

 

PENGLAI INDUSTRIAL CORPORATION LIMITED