SHENZHEN PENGLAI Industrial Corporation Limited
SINCE 2003
CERTIFICATES
CONTACT US

Email:jackdu999@yahoo.com

Tel:+86-755-86718316

WhatsApp:+86-15811882441

Chilean customers purchased 5pcs portable handheld capping machine manual caps chucks
Published by: PENGLAI INDUSTRIAL CORPORATION
Date:2017-08-11 17:33:54

Our Regular customers from Chile (South America) placed another order on five(5*) pcs of machines:model YX-EC60 capping machine handheld capper:
For all the machines purchased it is clear to confirm all the information on the products so we often ask our customers to freight the samples to
test and commission the machines in order that the machines and customer's products gains the best compatibility and adaptability.
After getting the confirmation &samples of the product in sizes and drawing for manufacturing the capping machines
we spent only 7days finishing everything and made the machines ready after testing them in a satisfactory feedback.
Recently our customers sent us the positive commentar on the machines which keep running very well in their factory ever since the machines arrived their factory.
The machines was shipped via courier to Chile . The documentaries certificated with ISO&CO&CE together with other files necessory are sent via DHL to customer for assisting customers to clear the custom.

As below there listed the basic information on the successful transaction between PENGLAI and their South American counterpart:

Purchased order issued from Chilean customer:

PO in the Email communication.jpg

Samples sent from customers in Chile
capper and bottles samples.jpg

caps handheld capper semi automatic.jpg

bank xopt from Customers.jpg
Bank copy of Down&balance payment for purchasing capping machine

bank xopt from Customers.jpg

Testing videos on capping machines

Wooden case packing of model YX-EC60 handheld capping machines.

bottles capper 5pcs semi automatic.jpg

5pcs of capper.jpg

capper in case 5pcs.jpg

5pcs portable capper.jpg

packing in case capper.jpg

As follow there given the description on the machines purchased respectively

Hand-held electric Capping Machine easy to carry, can be easily used to tighten loose, or spin a variety of caps. The adjustable clutch can effectively avoid the cap damage and reduce the wear and tear inside the plug.Once the cap is fully tightened, the machine automatically stop rotating head that you can cap the next operation.

diagrame of electric capping machine.jpg

The capping machine include: host, aluminum capping head and buffer.

OPERATION on handheld capper equipment semi automatic:

Put Chuck onto the Cap to be tightened

Push down switch to active the Capper

The Capper starts and tightens the cap

The Capper automatically shuts off while reaching the pre set torque

SPECIFICATION  of model YX-EC60 Handheld electric capping machine:

payment terms shipping delivery of capping machine.jpg

Power Supply

220V/60HZ

Chuck Size Available

10-20 MM

20-30 MM

30-40 MM

40-50 MM

Standard Units

Chuck x 2

Hand Tool x1

Spring Balancer x1

Rubber insert x4

Voltage:AC220V/50HZ/60HZ

Reactive rate(W):80

Work:electric capping
Type:Manual
Case:plastic material
Production capacity:(times/min),depending on the worker,s operation.
Applicable bottles of high:(mm):random
The size(cm):7(seven)by 30
how-to about Handheld capping machine
capping head in hand.jpg
instruction of hand held capping machine.jpg

Operating Procedures:

(1) Directly plug in the 220V’s 3-outlet power socket that connects with ground wire.

(2) Place the reversible switch to the required position (downward is forward rotation, upward is backward rotation, middle is for neutral).

(3) Insert the screw capping head into the main bearing mouth, and push it into the right place by positioning to the U-slot.

(4) Moving the moment adjusting collar to the required place(the moment increases in clockwise, otherwise decrease).

(5) Accurately position the screw capping caps to the screw and press the pressure lever switch, it will start.

Matters Need Attention

(1) This instrument must be used under a circuit that having a ground line.

(2) This instrument cannot be used in wet, corrosive and high-density dust atmosphere.

(3) To protect the breadboard and the electric motor, you cannot change the reversible switch that in operation. Or it will shorten the device lifetime.

(4) You should not dissemble the instrument in case of its failure within the warranty time, what is suggested is to take it to the appointed maintenance station, or you will take the consequences by yourself.

 capping head of portable capping.jpg

Capping samples :

mineral bottles capping machine.jpg

plastic bottles for screw capping.jpg

ALL RIGHTS RESERVED by ®PENGLAI INDUSTRIAL CORPORATION LIMITED